| 1. | 通報成員：厄瓜多爾 |
| 2. | 負責機構：Servicio Ecuatoriano de Normalización, INEN (Ecuadorian Standardization Service) |
| 3. |
通報依據的條款：Article 2.9.2 [X], 2.10.1 [ ], 5.6.2 [ ], 5.7.1 [ ]
通報依據的條款其他：
|
| 4. | 覆蓋的產品：Pressure-reducing valves (HS 848110); Check (nonreturn) valves for pipes, boiler shells, tanks, vats or the like (HS 848130)
ICS：[] HS：[] |
| 5. |
通報標題：厄瓜多爾標準協會技術法規PRTEINEN No. 090 “減壓閥”第2次修訂草案（2R）頁數：11 使用語言：西班牙語 鏈接網址： |
| 6. |
內容簡述： The notified Ecuadorian Technical Regulation establishes the requirements to be met by pressure-reducing valves, prior to the marketing of domestic and imported products, with the aim of protecting human safety and preventing deceptive practices. It applies to the following products: Water pressure-reducing valves: 1. Water pressure-reducing valves and combination water pressure-reducing valves, with nominal diameters from DN 8 (1/4") to DN 100 (4"), for water input pressures not exceeding 1.6 MPa (16 bars) and water temperatures not exceeding 30oC and 80oC for cold and hot water applications, respectively (used in building and construction). 2. Water pressure-reducing valves used in or connected to above- or below-ground water supply piping systems that transport water intended for human consumption (for municipal drinking-water networks). 3. Water pressure-reducing valves intended for use in agricultural irrigation systems, with nominal diameters from DN 8 (1/4") to DN 100 (4"), for use with water at temperatures up to 60oC. 4. Water pressure-reducing valves used in fire-fighting systems. Direct-acting pressure-reducing and pressure-limiting valves for reducing water pressure in vertical piping systems or sprinkler system supply pipes. |
| 7. | 目的和理由：Consumer information, labelling; Prevention of deceptive practices and consumer protection; Protection of human health or safety |
| 8. | 相關文件： Normative references:1.ISO 2859-1:1999+Amd 1:2011, Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection.2.ISO 6182-5:2012, Fire protection - Automatic sprinkler systems - Part 5: Requirements and test methods for deluge valves.3.ISO 9393-1:2004, Thermoplastics valves for industrial applications - Pressure test methods and requirements - Part 1: General.4.ISO 9911:2006, Agricultural irrigation equipment - Manually operated small plastics valves.5.ISO/IEC 17025:2017, General requirements for the competence of testing and calibration laboratories.6.ISO/IEC 17067:2013, Conformity assessment - Fundamentals of product certification and guidelines for product certification schemes.7.EN 1074-1:2000, Valves for water supply. Fitness for purpose requirements and appropriate verification tests. General requirements.8.EN 1074-5:2001, Valves for water supply. Fitness for purpose requirements and appropriate verification tests. Control valves.9.EN 12516-3:2002, Valves - Shell design strength - Part 3: Experimental method.10.EN 1567:1999, Building valves. Water pressure reducing valves and combination water reducing valves. Requirements and tests.11.UL 260:2004, Standard for Dry Pipe and Deluge Valves for Fire-Protection Service.12.UL 1468:2016, Standard for Direct Acting Pressure Reducing and Pressure Restricting Valves.13.UL 1739:2017, Standard for Pilot-Operated Pressure-Control Valves for Fire-Protection Service.14.ASME B16.34:2017, Valves - Flanged, Threaded, and Welding End.Notification history:G/TBT/N/ECU/413 |
| 9. |
擬批準日期：
30 days from notification or thereafter 擬生效日期： Six months from the date of adoption |
| 10. | 意見反饋截至日期：30 days from notification |
| 11. |
文本可從以下機構得到：
Contact and/or national enquiry point: Subsecretaría de Calidad Ministerio de Producción, Comercio Exterior, Inversiones y Pesca (MPCEIP) Address: Av. Amazonas entre Unión Nacional de Periodistas y Alfonso Pereira, Piso 8, Bloque amarillo Tel.: (+593-2) 3948760, Ext. 2254 - 2272 Email: puntocontacto-OTCECU@produccion.gob.ec; puntocontactoOTCECU@gmail.com; jmarino@produccion.gob.ec; cyepez@produccion.gob.ec; jsanchezc@produccion.gob.ec https://members.wto.org/crnattachments/2020/TBT/ECU/20_4454_00_s.pdf |
The notified Ecuadorian Technical Regulation establishes the requirements to be met by pressure-reducing valves, prior to the marketing of domestic and imported products, with the aim of protecting human safety and preventing deceptive practices.
It applies to the following products:
Water pressure-reducing valves:
1. Water pressure-reducing valves and combination water pressure-reducing valves, with nominal diameters from DN 8 (1/4") to DN 100 (4"), for water input pressures not exceeding 1.6 MPa (16 bars) and water temperatures not exceeding 30oC and 80oC for cold and hot water applications, respectively (used in building and construction).
2. Water pressure-reducing valves used in or connected to above- or below-ground water supply piping systems that transport water intended for human consumption (for municipal drinking-water networks).
3. Water pressure-reducing valves intended for use in agricultural irrigation systems, with nominal diameters from DN 8 (1/4") to DN 100 (4"), for use with water at temperatures up to 60oC.
4. Water pressure-reducing valves used in fire-fighting systems.
Direct-acting pressure-reducing and pressure-limiting valves for reducing water pressure in vertical piping systems or sprinkler system supply pipes.
粵公網安備 44010602010620號