海灣標準組織(GSO)對測試報告的新規(guī)定自2024年7月30日起生效，在此摘取重點內容再次提醒：

1. Maximum Acceptance Period for Test Results: 測試結果的最長接受期限 

a. Test results shall be generally considered valid only if obtained within a period no longer than 3 years prior to the date of the manufacturer’s application for G-Mark certification to the Notified Body。

一般而言，只有在制造商向指定機構申請G-Mark認證之日時不超過 3 年的測試結果才被視為有效。

b. Effective immediately, test results utilized for Gulf Type Examination certification will be considered valid if obtained within a period not exceeding three years from the date of actual test performance. This period is determined from the date when testing activities were completed and issued the test report, as explicitly stated in the laboratory testing report.

從即日起，用于海灣地區(qū)型式認證的測試結果，如果是在自實際測試之日起不超過三年的時間內獲得的，則視為有效。該期限從實驗室測試報告中明確說明的測試完成并出具測試報告之日算起。

2. Traceability of the test reports to the products applied for certification: 測試報告與申請認證產品的可追溯性

a. Test reports shall explicitly reference the manufacturer, brand, and model of the products applied to be certified for G-Mark.

測試報告應明確列出申請 G-Mark 的制造商、品牌和型號。

b. The manufacturing location (factory), if indicated in the test report, shall match the information provided in the application for certification.

生產地點（工廠），如在測試報告中標明，應與認證申請中的信息一致。

c. The test reports shall include sufficient photo documentation of the tested products to permit the Notified Body to identify the applied product (model), in particular in case of family models or product series.

測試報告應包含足夠的測試產品照片資料，以便指定機構識別申請認證的產品 （型號），特別是家族型號或系列型號。

3. Product Identity Declaration (PID) 產品標識聲明

a. In cases where the test report does not directly correspond to the product model applied for certification, a Product Identity Declaration (PID) or Declaration of Identity (DOI) shall be provided showing the correlation, similarities and differences between the products applied for certification and the tested products and include the references to all test reports that show the relevant test results.

如果測試報告與申請的產品型號不一致，則應提供產品標識聲明 (PID 或 DOI)，說明申請認證的產品與測試產品之間的相關性、相似性和差異，包括相關測試結果的所有測試報告的參考引用。

b. The PID/DOI shall be signed by an authorized person on behalf of the manufacturer or his authorized representative (e.g. technical responsible or top management representative) and issued on an official letter showing the name and address of the issuing company.

PID/DOI 應由代表制造商的授權人或其授權代表（如技術負責人或高層管理代表）在顯示公司名稱和地址的正式信函上簽署。

轉載鏈接：https://www.intertek.com.cn/listdata/1820731038641426432.html

關注“廣東技術性貿易措施”，獲取更多服務。