產品幾何技術規范
標準號 | 日期 | 標準名稱 | 標準名稱(中) | 鏈接 |
NF E11-017 | 1996年12月 | Geometrical product specification (gps). Length measuring instruments. Standard wires. Specifications. Test methods. - Spécification géométrique des produits (GPS) | 產品幾何技術規范(gps)。長度測量?jī)x器。標準電線。規范。試驗方法。 | 查看 |
FD E11-157 | 1997年12月 | Geometrical product specifications (GPS). Coordinate measuring machines. Guideline for the preparation of specifications. - Spécification géométrique des produits (GPS) | 產品幾何技術規范(GPS)。坐標測量機。規范編制指南。 | 查看 |
NF EN ISO 4287 | 1998年12月 | Geometrical Product Specifications (GPS) - Surface texture : profile method - Terms, definitions and surface texture parameters - Spécification géométrique des produits (GPS) | 產品幾何技術規范(GPS)-表面結構:輪廓法-術語,定義和表面結構參數 | 查看 |
NF E11-097 | 1998年2月 | Geometrical product specification (GPS). Length measuring instruments. Screw micrometers depth gauges. Specifications. Test methods. - Spécification géométrique des produits (GPS) | 產品幾何技術規范(GPS)。長度測量?jī)x器。螺旋千分尺深度計。規范。試驗方法。 | 查看 |
NF EN ISO 12085 | 1998年3月 | Geometrical Product Specifications (GPS) - Surface texture : profile method - Motif parameters - Spécification géométrique des produits (GPS) | 產品幾何技術規范(GPS)-表面特征:剖面法-主要參數 | 查看 |
NF EN ISO 13565-1 | 1998年3月 | Geometrical Product Specifications (GPS) - Surface texture : profile method - Surfaces having stratified functional properties - Part 1 : filtering and general measurement conditions - Spécification géométrique des produits (GPS) | 產品幾何技術規范(GPS)-表面結構:輪廓法-具有分層功能特性的表面-第1部分:過濾和一般測量條件 | 查看 |
NF EN ISO 13565-2 | 1998年3月 | Geometrical Product Specifications (GPS) - Surface texture : profile method - Surfaces having stratified functional properties - Part 2 : height characterization using the linear material ratio curve - Spécification géométrique des produits (GPS) | 產品幾何技術規范(GPS)-表面結構:輪廓法-具有分層功能特性的表面-第2部分:使用線性材料比率曲線的高度特性 | 查看 |
NF EN ISO 3274 | 1998年3月 | Geometrical product specifications (GPS) - Surface texture : profile method - Nominal characteristics of contact (stylus) instruments - Spécification géométrique des produits (GPS) | 產品幾何技術規范(GPS)-表面特征:輪廓法-接觸尖筆式記錄儀的一般特性 | 查看 |
NF EN ISO 4288 | 1998年3月 | Geometrical product specifications (GPS). Surface texture : profile method. Rules and procedures for the assessment of surface texture. - Spécification géométrique des produits (GPS) | 產品幾何技術規范(GPS)-表面構造:斷面法-表面構造評估的規則和程序 | 查看 |
NF EN ISO 8785 | 1999年12月 | Geometrical Product Specification (GPS) - Surface imperfections - Terms, definitions and parameters - Spécification géométrique des produits (GPS) | 產品幾何技術規范(GPS)-表面缺陷-術語,定義和參數 | 查看 |
NF EN ISO 3650 | 1999年3月 | Geometrical product specifications (GPS) - Length standards - Gauge blocks - Spécification géométrique des produits (GPS) | 產品幾何技術規范(GPS)-長度標準-量塊 | 查看 |
NF EN ISO 12179 | 2000年5月 | Geometrical Product Specifications (GPS) - Surface texture : profil method - Calibration of contact (stylus) instruments - Spécification géométrique des produits (GPS) | 產品幾何技術規范(GPS)-表面結構:輪廓法-接觸式(觸針)儀器的校準 | 查看 |
NF EN ISO 10360-3 | 2000年8月 | Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 3 : CMMs with the axis of a rotary table as the fourth axis - Spécification géométrique des produits (GPS) | 產品幾何技術規范(GPS)-坐標式測量設備(CMM)的驗收和再鑒定試驗-第3部分:旋轉臺的軸線作為第四條軸線的坐標式測量?jī)x器 | 查看 |
NF EN ISO 5436-1 | 2000年8月 | Geometrical product specifications (GPS) - Surface texture : profile method : measurement standards - Part 1 : material measures - Spécification géométrique des produits (GPS) | 產品幾何技術規范(GPS)-表面結構:輪廓法:測量標準-第1部分:材料測量 | 查看 |
NF E02-353 | 2001年1月 | Geometrical products specification (GPS) - Chased parts - Dimensional and surface eveness tolerances for dimensions and parts without individual tolerances - Spécification géométrique des produits (GPS) | 產品幾何技術規范(GPS)-開槽零件-尺寸和無單獨公差零件的尺寸和表面平整度公差 | 查看 |
NF EN ISO 10360-1 | 2001年3月 | Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 1 : vocabulary - Spécification géométrique des produits (GPS) | 產品幾何技術規范(GPS)-坐標測量機(CMM)的驗收和再驗證試驗-第1部分:詞匯 | 查看 |
NF E10-100-1 | 2002年12月 | Geometrical product specification (GPS) - Dimensional measuring methods - Part 1 : general conditions of measurement - Spécification géométrique des produits (GPS) | 產品幾何技術規范(GPS)-尺寸測量方法-第1部分:一般測量條件 | 查看 |
NF E11-019 | 2002年12月 | Geometrical product specification (GPS) - Specific standards - Rules of design and characteristics - Spécification géométrique des produits (GPS) | 產品幾何技術規范(GPS)-特殊標準-設計和特性規則 | 查看 |
NF E11-107 | 2002年12月 | Geometrical Product Specification (GPS) - Spheres for metrology - Spécification géométrique des produits (GPS) | 產品幾何技術規范(GPS)-計量范圍 | 查看 |
NF EN ISO 10360-6 | 2002年2月 | Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 6 : estimation of errors in computing Gaussian associated features - Spécification géométrique des produits (GPS) | 產品幾何技術規范(GPS)-坐標測量設備(CMM)的驗收和復檢試驗-第6部分:計算高斯相關特征誤差的估計 | 查看 |
NF EN ISO 13565-3 | 2002年2月 | Geometrical Product Specification (GPS) - Surface texture : profile method - Surfaces having stratified functional properties - Part 3 : height characterization using the material probability curve - Spécification géométrique des produits (GPS) | 產品幾何技術規范(GPS)-表面結構:輪廓法-具有分層功能特性的表面-第3部分:使用材料概率曲線的高度特性 | 查看 |
NF EN ISO 1302 | 2002年4月 | Geometrical Product Specification (GPS) - Indication of surface texture in technical product documentation - Spécification géométrique des produits (GPS) | 產品幾何技術規范(GPS)-技術產品文件中表面紋理的指示 | 查看 |
NF E05-059-1 | 2003年10月 | Geometrical products specification (GPS) - Acceptance tests and reverification tests of profile measuring instruments - Part 1 : measuring instruments for areal surface texture - Spécification géométrique des produits (GPS) | 產品幾何技術規范(GPS)-輪廓測量?jī)x器的驗收試驗和再鑒定試驗-第1部分:表面結構測量?jī)x器 | 查看 |
NF E11-018 | 2003年10月 | Geometrical product specification (GPS) - Calibration specimens - Plugs with grooves - Spécification géométrique des produits (GPS) | 產品幾何技術規范(GPS)-校準試樣-帶槽的插頭 | 查看 |
XP E03-110 | 2003年12月 | Geometrical product specification (GPS) - Screw threads - Direct measuring methods - Spécification géométrique des produits (GPS) | 產品幾何技術規范(GPS)-螺紋-直接測量方法 | 查看 |
NF E11-200 | 2004年3月 | Geometrical product specification (GPS) - Measuring instruments in use - Use classes - Spécification géométrique des produits (GPS) | 產品幾何技術規范(GPS)-使用中的測量?jī)x器-使用類別 | 查看 |
XP ISO/TS 23165 | 2006年12月 | Geometrical product specifications (GPS) - Guidelines for the evaluation of coordinate measuring machine (CMM) test uncertainty - Spécification géométrique des produits (GPS) | 產品幾何技術規范(GPS)-坐標測量機(CMM)試驗不確定度評定指南 | 查看 |
NF EN ISO 8062-3 | 2007年10月 | Geometrical Product Specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 3 : general dimensional and geometrical tolerances and machining allowances for castings - Spécification géométrique des produits (GPS) | 產品幾何技術規范(GPS)-模制件尺寸和幾何公差-第3部分:鑄件用一般尺寸、幾何公差和機械加工余量 | 查看 |
FD ISO/TR 16015 | 2007年11月 | Geometrical product specifications (GPS) - Systematic errors and contributions to measurement uncertainty of length measurement due to thermal influences - Spécification géométrique des produits (GPS) | 產品幾何技術規范(GPS)-由于熱的影響造成長度測量的系統誤差和測量不確定度 | 查看 |
NF EN ISO 8062-1 | 2007年8月 | Geometrical product specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 1 : vocabulary - Spécification géométrique des produits (GPS) | 產品幾何技術規范(GPS)-模制零件的尺寸和幾何公差-第1部分:詞匯 | 查看 |
XP ISO/TS 15530-4 | 2008年7月 | Geometrical Product Specifications (GPS) - Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement - Part 4: Evaluating task-specific measurement uncertainty using simulation - Spécification géométrique des produits (GPS) | 產品幾何量技術規范(GPS)-坐標測量機(CMM)-測量不確定度的測定技術-使用模擬方法評估特殊任務測量的不確定度 | 查看 |
NF EN ISO 10135 | 2009年4月 | Geometrical product specifications (GPS) - Drawing indications for moulded parts in technical product documentation (TPD) - Spécification géométrique des produits (GPS) | 產品幾何技術規范(GPS)-技術產品文件(TPD)中模制零件的圖紙標注 | 查看 |
NF EN ISO 4287/A1 | 2009年8月 | Geometrical Product Specifications (GPS) - Surface texture : profile method - Terms, definitions and surface texture parameters - Amendment 1 : peak count number - Spécification géométrique des produits (GPS) | 產品幾何量技術規范-表面構造: 剖面法-術語、定義及表面構造參數 | 查看 |
XP ISO/TS 16610-32 | 2009年8月 | Geometrical product specifications (GPS) - Filtration - Part 32 : robust profile filters : spline filters - Spécification géométrique des produits (GPS) | 產品幾何量技術規范(GPS)-過濾-魯棒輪廓濾波器-樣條濾波器 | 查看 |
NF EN ISO 10360-2 | 2010年1月 | Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 2 : CMMs used for measuring linear dimensions - Spécification géométrique des produits (GPS) | 產品幾何技術規范(GPS)-坐標測量機(CMM)的驗收和再驗證試驗-第2部分:測量線性尺寸用CMM | 查看 |
NF EN ISO 25178-6 | 2010年5月 | Geometrical product specifications (GPS) - Surface texture : Areal - Part 6 : classification of methods for measuring surface texture - Spécification géométrique des produits (GPS) | 產品幾何技術規范(GPS)-表面紋理:表面的-第6部分:表面紋理測量方法的分類 | 查看 |
XP CEN ISO/TS 14253-4 | 2010年7月 | Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 4 : Background on functional limits and specification limits in decision rules - Spécification géométrique des produits (GPS) | 產品幾何技術規范(GPS)-工件和測量設備的測量檢驗-第4部分:判定規則中功能極限和規范極限的背景 | 查看 |
NF EN ISO 25178-601 | 2010年8月 | Geometrical product specifications (GPS) - Surface texture : areal - Part 601 : nominal characteristics of contact (stylus) instruments - Spécification géométrique des produits (GPS) | 產品幾何技術規范(GPS)-表面結構:區域-第601部分:接觸(觸針)儀器的標稱特性 | 查看 |
NF EN ISO 25178-602 | 2010年8月 | Geometrical product specifications (GPS) - Surface texture : Areal - Part 602 : nominal characteristics of non-contact (confocal chromatic probe) instruments - Spécification géométrique des produits (GPS) | 產品幾何技術規范(GPS)-表面結構:區域-第602部分:非接觸(共焦彩色探針)儀器的標稱特性 | 查看 |
NF EN ISO 25178-701 | 2010年8月 | Geometrical product specifications (GPS) - Surface texture : areal - Part 701 : calibration and measurement standards for contact (stylus) instruments - Spécification géométrique des produits (GPS) | 產品幾何技術規范(GPS)-表面結構:區域-第701部分:接觸(觸針)儀器的校準和測量標準 | 查看 |
NF EN ISO 286-1 | 2010年9月 | Geometrical product specification (GPS) - ISO code system for tolerances of linear sizes - Part 1 : basis of tolerances, deviations and fits - Spécification géométrique des produits (GPS) | 產品幾何技術規范(GPS)-線性尺寸公差的ISO規范體系-第1部分:基本公差、偏差和定值 | 查看 |
NF EN ISO 286-2 | 2010年9月 | Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2 : tables of standard tolerance classes and limit deviations for holes and shafts - Spécification géométrique des produits (GPS) | 產品幾何技術規范(GPS)-線性尺寸公差的ISO代碼系統-第2部分:孔和軸的標準公差等級和極限偏差表 | 查看 |
NF EN ISO 5459 | 2011年11月 | Geometrical product specifications (GPS) - Geometrical tolerancing - Datums and datum-systems - Spécification géométrique des produits (GPS) | 產品幾何技術規范(GPS)-幾何公差-基準和基準系統 | 查看 |
NF EN ISO 15530-3 | 2011年12月 | Geometrical product specifications (GPS) - Coordinate measuring machines (CMM): technique for determining the uncertainty of measurement - Part 3 : use of calibrated workpieces or measurement standards - Spécification géométrique des produits (GPS) | 產品幾何技術規范(GPS)-坐標測量機(CMM):測量不確定度的測定技術-第3部分:校準工件或測量標準的使用 | 查看 |
NF EN ISO 3611 | 2011年1月 | Geometrical product specifications (GPS) - Dimensional measuring equipment : Micrometers for external measurements - Design and metrological characteristics - Spécification géométrique des produits (GPS) | 產品幾何技術規范(GPS)-尺寸測量設備:外部測量用千分尺-設計和計量特性 | 查看 |
NF EN ISO 14406 | 2011年2月 | Geometrical product specifications (GPS) - Extraction - Spécification géométrique des produits (GPS) | 產品幾何技術規范(GPS)-提取 | 查看 |
NF EN ISO 9493 | 2011年2月 | Geometrical product specifications (GPS) - Dimensional measuring equipment : dial test indicators (lever type) - Design and metrological characteristics - Spécification géométrique des produits (GPS) | 產品幾何技術規范(GPS)-尺寸測量設備:刻度盤測試指示器(杠桿式)-設計和計量學特征 | 查看 |
NF EN ISO 12181-1 | 2011年5月 | Geometrical product specifications (GPS) - Roundness - Part 1 : vocabulary and parameters of roundness - Spécification géométrique des produits (GPS) | 產品幾何技術規范(GPS)-圓度-第1部分:圓度詞匯和參數 | 查看 |
NF EN ISO 12181-2 | 2011年5月 | Geometrical product specifications (GPS) - Roundness - Part 2 : specification operators - Spécification géométrique des produits (GPS) | 產品幾何技術規范(GPS)-真圓度-第2部分:規范操作 | 查看 |
NF EN ISO 12780-1 | 2011年5月 | Geometrical product specifications (GPS) - Straightness - Part 1 : vocabulary and parameters of straightness - Spécification géométrique des produits (GPS) | 產品幾何技術規范(GPS)-直線度-第1部分:直線度詞匯和參數 | 查看 |
NF EN ISO 12780-2 | 2011年5月 | Geometrical product specifications (GPS) - Straightness - Part 2 : specification operators - Spécification géométrique des produits (GPS) | 產品幾何技術規范(GPS)-直線度-第2部分:規范操作員 | 查看 |
NF EN ISO 12781-1 | 2011年5月 | Geometrical product specifications (GPS) - Flatness - Part 1 : vocabulary and parameters of flatness - Spécification géométrique des produits (GPS) | 產品幾何技術規范(GPS)-平整度-第1部分:平整度詞匯和參數 | 查看 |
NF EN ISO 12781-2 | 2011年5月 | Geometrical product specifications (GPS) - Flatness - Part 2 : specification operators - Spécification géométrique des produits (GPS) | 產品幾何技術規范(GPS)-平面度-第2部分:規范操作員 | 查看 |
NF EN ISO 12180-1 | 2011年6月 | Geometrical product specifications (GPS) - Cylindricity - Part 1 : vocabulary and parameters of cylindrical form - Spécification géométrique des produits (GPS) | 產品幾何技術規范(GPS)-圓柱度-第1部分:圓柱度形術語及參數 | 查看 |
NF EN ISO 12180-2 | 2011年6月 | Geometrical product specifications (GPS) - Cylindricity - Part 2 : specification operators - Spécification géométrique des produits (GPS) | 產品幾何技術規范(GPS)-圓柱度-第2部分:規范操作器 | 查看 |
NF EN ISO 25378 | 2011年6月 | Geometrical product specifications (GPS) - Characteristics and conditions - Definitions - Spécification géométrique des produits | 產品幾何技術規范(GPS)-特性和條件-定義 | 查看 |
NF EN ISO 14253-2 | 2011年7月 | Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 2 : guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification - Spécification géométrique des produits (GPS) | 產品幾何技術規范(GPS)-工件與測量設備的測量檢驗-第2部分:GPS測定、測定裝備校正與產品驗證的不確定性推測指南 | 查看 |
NF EN ISO 14253-3 | 2011年7月 | Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 3 : guidelines for achieving agreements on measurement uncertainty statements - Spécification géométrique des produits (GPS) | 產品幾何技術規范(GPS)-工件和測量設備的測量檢驗-第3部分:達成測量不確定度聲明協議的指南 | 查看 |
NF EN ISO 10360-7 | 2011年8月 | Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 7 : CMMs equipped with imaging probing systems - Spécification géométrique des produits (GPS) | 產品幾何技術規范(GPS)-坐標測量機(CMM)的驗收和再驗證試驗-第7部分:裝有成像探測系統的CMM | 查看 |
NF EN ISO 8015 | 2011年8月 | Geometrical product specifications (GPS) - Fundamentals - Concepts, principles and rules - Spécification géométrique des produits (GPS) | 產品幾何技術規范(GPS)-基礎-概念,原則和規則 | 查看 |
NF EN ISO 13102 | 2012年10月 | Geometrical product specifications (GPS) - dimensional measuring equipment : electronic digital-indicator gauge - Design and metrological characteristics - Spécification géométrique des produits (GPS) | 產品幾何技術規范(GPS)-尺寸測量設備:電子數字指示計-設計和計量特性 | 查看 |
NF EN ISO 16610-21 | 2012年11月 | Geometrical product specifications (GPS) - Filtration - Part 21 : linear profile filters : gaussian filters - Spécification géométrique des produits (GPS) | 產品幾何技術規范(GPS)-過濾-第21部分:線性輪廓濾波器:高斯濾波器 | 查看 |
NF EN ISO 17450-2 | 2012年11月 | Geometrical product specifications (GPS) - General concepts - Part 2 : basic tenets, specifications, operators, uncertainties and ambiguities - Spécification géométrique des produits (GPS) | 產品幾何技術規范(GPS)-一般概念-第2部分:基本原理,規范,運算符,不確定性和模糊性 | 查看 |
NF E04-009 | 2012年12月 | Geometrical product specification (GPS) - Hierarchical organization of product/process characteristics - Spécification géométrique des produits (GPS) | 產品幾何技術規范(GPS)-產品/工藝特性的分級組織 | 查看 |
NF EN ISO 5436-2 | 2012年12月 | Geometrical Product Specifications (GPS) - Surface texture : profile method - Measurement standards - Part 2 : software measurement standards - Spécification géométrique des produits (GPS) | 產品幾何技術規范(GPS)-表面結構:輪廓法-測量標準-第2部分:軟件測量標準 | 查看 |
NF EN ISO 22432 | 2012年1月 | Geometrical product specifications (GPS) - Features utilized in specification and verification - Spécification géométrique des produits (GPS) | 產品幾何技術規范(GPS)-規范和驗證中使用的特性 | 查看 |
NF EN ISO 1119 | 2012年2月 | Geometrical Product Specifications (GPS) - Series of conical tapers and taper angles - Spécification géométrique des produits (GPS) | 產品幾何技術規范(GPS)-錐度和錐角系列 | 查看 |
NF EN ISO 17450-1 | 2012年2月 | Geometrical product specifications (GPS) - General concepts - Part 1 : model for geometrical specification and verification - Spécification géométrique des produits (GPS) | 產品幾何技術規范(GPS)一般概念第1部分:幾何技術規范和驗證模型 | 查看 |
NF EN ISO 25178-2 | 2012年5月 | Geometrical product specifications (GPS) - Surface texture : Areal - Part 2 : terms, definitions and surface texture parameters - Spécification géométrique des produits (GPS) | 產品幾何技術規范(GPS)-表面結構:區域-第2部分:術語、定義和表面結構參數 | 查看 |
NF EN ISO 13225 | 2012年7月 | Geometrical product specifications (GPS) - Dimensional measuring instruments - Height gauges - Design and metrological characteristics - Spécification géométrique des produits (GPS) | 產品幾何技術規范(GPS)-帶徑向收縮式套筒的機械千分表-高度計-計量特性和設計 | 查看 |
NF EN ISO 25178-3 | 2012年9月 | Geometrical product specifications (GPS) - Surface texture : Areal - Part 3 : Specification operators - Spécification géométrique des produits (GPS) | 產品幾何技術規范(GPS)-表面紋理:表面-第3部分:操作者規范 | 查看 |
NF E04-008 | 2013年10月 | Geometrical Product Specifications (GPS) - Tolerance allocation method, indications and acceptance criteria - Methods based on arithmetics, quadratic and inertial statistics - Spécification géométrique des produits (GPS) | 產品幾何技術規范(GPS)-公差分配方法、示值和驗收標準-基于算術、二次方程式和慣性統計數據的方法 | 查看 |
NF E11-053 | 2013年10月 | Geometrical product specification (GPS) - Length measuring instruments - Reception and verification of dial test indicators (lever type) - Spécification géométrique des produits (GPS) | 產品幾何技術規范(GPS)-長度測量?jī)x器-千分表(杠桿式)的接收和檢驗 | 查看 |
NF E11-095 | 2013年10月 | Geometrical product specification (GPS) - Dimensional measuring equipment - Reception and verification of micrometers for external measurements - Spécification géométrique des produits (GPS) | 產品幾何技術規范(GPS)-尺寸測量設備-外部測量用千分尺的接收和檢驗 | 查看 |
NF E11-096 | 2013年10月 | Geometrical product specification (GPS) - Dimensional measuring equipment - Reception and verification of depth gauges - Spécification géométrique des produits (GPS) | 產品幾何技術規范(GPS)-尺寸測量設備 - 深度計的接收和驗證 | 查看 |
NF EN ISO 16610-85 | 2013年10月 | Geometrical product specifications (GPS) - Filtration - Part 85 : morphological area filters : segmentation - Spécification géométrique des produits (GPS) | 產品幾何技術規范(GPS)-過濾-第85部分:形態區域過濾器:分段 | 查看 |
XP CEN ISO/TS 15530-1 | 2013年10月 | Geometrical Product Specifications (GPS) - Coordinate measuring machines (CMM) : technique for determining the uncertainty of measurement - Part 1 : overview and metrological characteristics - Spécification géométrique des produits (GPS) | 產品幾何技術規范(GPS)-坐標測量機(CMM)-測量不確定度的測定技術-第1部分:概述和計量特性 | 查看 |
NF EN ISO 10579 | 2013年11月 | Geometrical product specifications (GPS) - Dimensioning and tolerancing - Non-rigid parts - Spécification géométrique des produits (GPS) | 產品幾何技術規范(GPS)-尺寸和公差-非剛性零件 | 查看 |
NF EN ISO 25178-603 | 2013年12月 | Geometrical product specifications (GPS) - Surface texture : areal - Part 603 : nominal characteristics of non-contact (phase shifting interferometric microscopy) instruments - Spécification géométrique des produits (GPS) | 產品幾何技術規范(GPS)-表面結構:區域-第603部分:非接觸(相移干涉顯微鏡)儀器的標稱特性 | 查看 |
FD ISO/TR 14253-6 | 2013年3月 | Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 6 : generalized decision rules for the acceptance and rejection of instruments and workpieces - Spécification géométrique des produits (GPS) | 產品幾何技術規范(GPS)-工件和測量設備測量檢驗-第6部分:儀器和工件驗收和拒收的一般性決定規則 | 查看 |
NF E11-091 | 2013年3月 | Geometrical product specification (GPS) - Dimensional measuring equipment - Reception and verification of callipers - Spécification géométrique des produits (GPS) | 產品幾何技術規范(GPS)-尺寸測量設備-卡尺的接收和檢驗-產品規范(GPS) | 查看 |
NF E02-352 | 2013年8月 | Geometrical product specifications (GPS) - General tolerances (dimensional and geometrical) for cutted and bended workpieces - Spécification géométrique des produits (GPS) | 產品幾何技術規范(GPS)-切割和彎曲工件的一般公差(尺寸和幾何) | 查看 |
NF EN ISO 25178-604 | 2013年9月 | Geometrical product specification (GPS) - Surface texture : areal - Part 604 : nominal characteristics of non-contact (coherence scanning interferometry) instruments - Spécification géométrique des produits (GPS) | 產品幾何技術規范(GPS)-表面結構:面積-第604部分:非接觸(相干掃描干涉測量)儀器的標稱特性 | 查看 |
XP ISO/TS 17863 | 2013年9月 | Geometrical product specification (GPS) - Geometrical tolerancing of moveable assemblies - Spécification géométrique des produits (GPS) | 產品幾何技術規范(GPS)-可移動裝配的幾何公差 | 查看 |
NF EN ISO 2538-1 | 2014年11月 | Geometrical product specifications (GPS) - Wedges - Part 1 : series of angles and slopes - Spécification géométrique des produits (GPS) | 產品幾何技術規范(GPS)-楔子-第1部分:角度和坡度系列 | 查看 |
NF EN ISO 2538-2 | 2014年11月 | Geometrical product specifications (GPS) - Wedges - Part 2 : dimensioning and tolerancing - Spécification géométrique des produits (GPS) | 產品幾何技術規范(GPS)-楔塊-第2部分:尺寸和公差 | 查看 |
NF EN ISO 16610-71 | 2014年12月 | Geometrical product specifications (GPS) - Filtration - Part 71 : robust areal filters : gaussian regression filters - Spécification géométrique des produits (GPS) | 產品幾何技術規范(GPS)-過濾-第71部分:魯棒區域?yàn)V波器:高斯回歸濾波器 | 查看 |
XP CEN ISO/TS 8062-2 | 2014年12月 | Geometrical product specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 2 : rules - Spécification géométrique des produits (GPS) - Tolérances dimensionnelles et géométriques des pièces moulées - Partie 2 : règles d'utilisation | 產品幾何技術規范(GPS)-模制件空間和幾何公差-第2部分:規則 | 查看 |
NF EN ISO 10360-8 | 2014年2月 | Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMS) - Part 8: CMMs with optical distance sensors - Spécification géométrique des produits (GPS) | 產品幾何技術規范(GPS)-坐標測量機(CMS)的驗收和再驗證試驗-第8部分:帶光學距離傳感器的三坐標測量機 | 查看 |
NF EN ISO 10360-9 | 2014年2月 | Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 9 : CMMs with multiple probing systems - Spécification géométrique des produits (GPS) | 產品幾何技術規范(GPS)-坐標測量系統(CMS)的驗收和再驗證試驗-第9部分:帶多探測系統的坐標測量系統-產品規范(GPS) | 查看 |
NF EN ISO 25178-605 | 2014年3月 | Geometrical product specifications (GPS) - Surface texture : areal - Part 605 : nominal characteristics of non-contact (point autofocus probe) instruments - Spécification géométrique des produits (GPS) | 產品幾何技術規格(GPS)-表面結構: 平面式-第605部分: 非接觸式(連貫性掃描干涉法)儀器的標稱特性 | 查看 |
NF EN ISO 25178-70 | 2014年4月 | Geometrical product specification (GPS) - Surface texture : areal - Part 70 : material measures - Spécification géométrique des produits (GPS) | 產品幾何技術規范(GPS)-表面結構:區域-第70部分:材料測量 | 查看 |
NF ISO 492 | 2014年9月 | Rolling bearings - Radial bearings - Geometrical product specifications (GPS) and tolerance values - Roulements | 滾動軸承-徑向軸承-產品幾何技術規范(GPS)和公差值 | 查看 |
NF EN ISO 14253-5 | 2015年11月 | Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 5 : uncertainty in verification testing of indicating measuring instruments - Spécification géométrique des produits (GPS) | 產品幾何技術規范(GPS)-工件和測量設備的測量檢驗-第5部分:指示測量?jī)x器驗證試驗的不確定度 | 查看 |
NF EN ISO 1938-1 | 2015年12月 | Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1 : plain limit gauges of linear size - Spécification géométrique des produits (GPS) | 產品幾何技術規范(GPS)-尺寸測量設備-第1部分:線性尺寸的平面極限量規 | 查看 |
NF E04-013 | 2015年2月 | Geometrical product specification (GPS) - Symbol of workpiece holding - Spécification géométrique des produits (GPS) - Symbolisation des prises de pièces | 產品幾何技術規范(GPS)-工件夾持符號 | 查看 |
NF EN ISO 14638 | 2015年3月 | Geometrical product specification (GPS) - Matrix model - Spécification géométrique des produits (GPS) | 產品幾何產品規范-矩陣模型 | 查看 |
NF EN ISO 2692 | 2015年3月 | Geometrical product specifications (GPS) - Geometrical tolerancing - Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR) - Spécification géométrique des produits (GPS) - Tolérancement géométrique - Exigence du maximum de matière (MMR), exigence du minimum de matière (LMR) et exigence de réciprocité (RPR) | 產品幾何技術規范(GPS)-幾何公差-最大材料要求(MMR)、最小材料要求(LMR)和互易性要求(RPR) | 查看 |
NF EN ISO 16610-1 | 2015年6月 | Geometrical product specifications (GPS) - Filtration - Part 1 : overview and basic concepts - Spécification géométrique des produits (GPS) - Filtrage - Partie 1 : vue d'ensemble et concepts de base | 產品幾何技術規范(GPS)-過濾-第1部分:概述和基本概念 | 查看 |
NF EN ISO 16610-20 | 2015年7月 | Geometrical product specifications (GPS) - Filtration - Part 20 : linear profile filters : basic concepts - Spécification géométrique des produits (GPS) - Filtrage - Partie 20 : filtres de profil linéaires : concepts de base | 產品幾何技術規范(GPS)-過濾-第20部分:線性輪廓過濾器:基本概念 | 查看 |
NF EN ISO 16610-40 | 2015年8月 | Geometrical product specifications (GPS) - Filtration - Part 40 : morphological profile filters : basic concepts - Spécification géométrique des produits (GPS) - Filtrage - Partie 40 : filtres de profil morphologiques : concepts de base | 產品幾何技術規范(GPS)-過濾-第40部分:形態輪廓過濾器:基本概念 | 查看 |
NF EN ISO 16610-41 | 2015年8月 | Geometrical product specifications (GPS) - Filtration - Part 41 : morphological profile filters : disk and horizontal line-segment filters - Spécification géométrique des produits (GPS) - Filtrage - Partie 41 : filtres de profil morphologiques : filtre disque et filtre segment de droite horizontal | 產品幾何技術規范(GPS)-過濾-第41部分:形態輪廓過濾器:圓盤和水平線段過濾器- | 查看 |
NF EN ISO 16610-49 | 2015年8月 | Geometrical product specifications (GPS) - Filtration - Part 49 : morphological profile filters : scale space techniques - Spécification géométrique des produits (GPS) - Filtrage - Partie 49 : filtres de profil morphologiques : techniques d'analyse par espace d'échelle | 產品幾何技術規范(GPS)-過濾-第49部分:形態輪廓過濾器:尺度空間技術 | 查看 |
NF EN ISO 25178-606 | 2015年8月 | Geometrical product specification (GPS) - Surface texture : areal - Part 606 : nominal characteristics of non-contact (focus variation) instruments - Spécification géométrique des produits (GPS) | 產品幾何技術規范(GPS)-表面結構:區域-第606部分:非接觸(焦點變化)儀器的標稱特性 | 查看 |
XP E04-007 | 2015年8月 | Geometrical product specifications (GPS) - Discreet modal decomposition - Analysis method - Spécification géométrique des produits (GPS) - Décomposition modale discrète - Méthode d'analyse | 產品幾何技術規范(GPS)-離散模態分解-分析方法 | 查看 |
NF EN ISO 16610-22 | 2015年9月 | Geometrical product specifications (GPS) - Filtration - Part 22 : linear profile filters : spline filters - Spécification géométrique des produits (GPS) - Filtrage - Partie 22 : filtres de profil linéaires : filtres splines | 產品幾何技術規范(GPS)-過濾-第22部分:線性輪廓濾波器:樣條濾波器 | 查看 |
NF EN ISO 16610-61 | 2015年9月 | Geometrical product specification (GPS) - Filtration - Part 61 : linear areal filters - Gaussian filters - Spécification géométrique des produits (GPS) | 產品幾何技術規范(GPS)-過濾-第61部分:線性區域?yàn)V波器-高斯濾波器 | 查看 |
NF EN ISO 17450-3 | 2016年10月 | Geometrical product specifications (GPS) - General concepts - Part 3 : toleranced features - Spécification géométrique des produits (GPS) - Concepts généraux - Partie 3 : éléments tolérancés | 產品幾何技術規范(GPS)-一般概念-第3部分:公差特性 | 查看 |
NF EN ISO 1 | 2016年11月 | Geometrical product specifications (GPS) - Standard reference temperature for the specification of geometrical and dimensional properties - Spécification géométrique des produits (GPS) - Température normale de référence pour la spécification des propriétés géométriques et dimensionnelles | 產品幾何技術規范(GPS)-幾何和尺寸特性規范的標準參考溫度 | 查看 |
NF EN ISO 10360-12 | 2016年12月 | Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 12 : articulated arm coordinate measurement machines (CMM) - Spécification géométrique des produits (GPS) - Essais de réception et de vérification périodique des machines à mesurer tridimensionnelles (MMT) - Partie 12 : MMT à bras articulés | 產品幾何技術規范(GPS)-坐標測量系統(CMS)的驗收和再驗證試驗-第12部分:鉸接臂坐標測量機(CMM) | 查看 |
NF EN ISO 14405-1 | 2016年12月 | Geometrical product specifications (GPS) - Dimensional tolerancing - Part 1 : linear sizes - Spécification géométrique des produits (GPS) - Tolérancement dimensionnel - Partie 1 : tailles linéaires | 產品幾何規范(GPS)-尺寸規格公差-第1部分:線性尺寸 | 查看 |
NF EN ISO 16610-31 | 2016年12月 | Geometrical product specifications (GPS) - Filtration - Part 31 : robust profile filters : gaussian regression filters - Spécification géométrique des produits (GPS) - Filtrage - Partie 31 : filtres de profil robustes : filtres de régression gaussiens | 產品幾何技術規范(GPS)-過濾-第31部分:魯棒輪廓濾波器:高斯回歸濾波器 | 查看 |
NF EN ISO 18391 | 2016年12月 | Geometrical product specifications (GPS) - Population specification - Spécification géométrique des produits - Spécification de population | 產品幾何技術規范(GPS)-總體規范-產品規范 | 查看 |
NF EN ISO 16610-60 | 2016年1月 | Geometrical product specification (GPS) - Filtration - Part 60 : linear areal filters - Basic concepts - Spécification géométrique des produits (GPS) | 產品幾何技術規范(GPS)-過濾-第60部分:線性區域過濾器-基本概念 | 查看 |
NF ISO 464 | 2016年2月 | Rolling bearings - Radial bearings with locating snap ring - Dimensions, geometrical product specifications (GPS) and tolerance values - Roulements | 滾動軸承-帶定位卡環的徑向軸承-尺寸-產品幾何技術規范(GPS)和公差值 | 查看 |
NF ISO 3245 | 2016年3月 | Rolling bearings - Needle roller bearings with drawn cup and without inner ring - Boundary dimensions, geometrical product specifications (GPS) and tolerance values - Roulements - Douilles à aiguilles sans bague intérieure - Spécifications géométrique des produits (GPS), Dimensions d'encombrement et tolérances | 滾動軸承-帶拉拔外圈和無內環的滾針軸承-外形尺寸,產品幾何技術規范(GPS)和公差值 | 查看 |
NF E11-056 | 2016年4月 | Geometrical product specification (GPS) - Dimensional measuring equipment - Reception and verification of digital dial gauge with plunger - Spécification géométrique des produits (GPS) - Instruments de mesurage dimensionnel - Réception et vérification des comparateurs à affichage numérique à tige rentrante radiale | 產品幾何技術規范(GPS)-尺寸測量設備-帶柱塞的數字千分表的接收和檢驗 | 查看 |
NF E11-057 | 2016年4月 | Geometrical product specification (GPS) - Length measuring instruments - Reception and verification of mechanical dial gauges with radial retractable stem - Spécification géométrique des produits (GPS) - Instruments de mesurage de longueur - Réception et vérification des comparateurs mécaniques à cadran | 產品幾何技術規范(GPS)-長度測量?jī)x器-徑向伸縮桿機械百分表的接收和驗證 | 查看 |
NF EN ISO 25178-1 | 2016年6月 | Geometrical product specifications (GPS) - Surface texture : areal - Part 1 : indication of surface texture - Spécification géométrique des produits (GPS) | 產品幾何技術規范(GPS)-表面紋理:區域-第1部分:表面紋理的指示 | 查看 |
NF EN ISO 10360-10 | 2016年7月 | Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMS) - Part 10 : laser trackers for measuring point-to-point distances - Spécification géométrique des produits (GPS) | 產品幾何技術規范(GPS)-坐標測量機(CMS)的驗收和再驗證試驗-第10部分:測量點對點距離的激光跟蹤器 | 查看 |
NF EN ISO 3040 | 2016年7月 | Geometrical product specifications (GPS) - Dimensioning and tolerancing - Cones - Spécification géométrique des produits (GPS) - Cotation et tolérancement - C?nes | 產品幾何技術規范(GPS)-尺寸和公差-錐體 | 查看 |
NF EN ISO 25178-71 | 2017年10月 | Geometrical product specifications (GPS) - Surface texture : areal - Part 71 : software measurement standards - Spécification géométrique des produits (GPS) - état de surface : Surfacique - Partie 71 : étalons logiciels | 產品幾何技術規范(GPS)-表面結構:區域-第71部分:軟件測量標準 | 查看 |
NF EN ISO 14253-1 | 2017年12月 | Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 1 : Decision rules for verifying conformity or nonconformity with specifications - Spécification géométrique des produits (GPS) - Vérification par la mesure des pièces et des équipements de mesure - Partie 1: Règles de décision pour contr?ler la conformité ou la non- conformité à la spécification | 產品幾何量技術規范(GPS)-工件的測量檢驗和測量設備-第1部分:按規范檢驗一致性或不一致性的判定規則 | 查看 |
NF EN ISO 14405-3 | 2017年3月 | Geometrical product specifications (GPS) - Dimensional tolerancing - Part 3 : angular sizes - Spécification géométrique des produits (GPS) | 產品幾何技術規范(GPS)-尺寸公差-第3部分:角度尺寸 | 查看 |
NF EN ISO 16610-28 | 2017年3月 | Geometrical product specifications (GPS) - Filtration - Part 28 : profile filters : end effects - Spécification géométrique des produits (GPS) - Filtrage - Partie 28 : filtres de profil : effets de bords | 產品幾何技術規范(GPS)-過濾-第28部分:形態剖面濾波器:端效應 | 查看 |
NF EN ISO 1101 | 2017年4月 | Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out - Spécification géométrique des produits (GPS) - Tolérancement géométrique - Tolérancement de forme, orientation, position et battement | 產品幾何技術規范(GPS)-幾何公差-形狀,方向,位置和跳動公差 | 查看 |
NF EN ISO 1660 | 2017年4月 | Geometrical product specifications (GPS) - Geometrical tolerancing - Profile tolerancing - Spécification géométrique des produits (GPS) | 產品幾何技術規范(GPS)-幾何公差 | 查看 |
NF EN ISO 16610-30 | 2017年4月 | Geometrical product specifications (GPS) - Filtration - Part 30 : robust profile filters : basic concepts - Spécification géométrique des produits (GPS) - Filtrage - Partie 30 : filtres de profil robustes : concepts de base | 產品幾何技術規范(GPS)-過濾-第30部分:魯棒輪廓過濾器:基本概念 | 查看 |
NF EN ISO 1938-2 | 2017年4月 | Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2 : reference disk gauges - Spécification géométrique des produits (GPS) - équipement de mesurage dimensionnel - Partie 2 : disques de référence pour calibres | 產品幾何技術規范(GPS)-尺寸-測量設備第2部分:基準圓盤規 | 查看 |
NF EN ISO 9013 | 2017年4月 | Thermal cutting - Classification of thermal cuts - Geometrical product specification and quality tolerances - Coupage thermique - Classification des coupes thermiques - Spécification géométrique des produits et tolérances relatives à la qualité | 熱切割-熱切割分類-產品幾何量技術規范和質量公差 | 查看 |
NF EN ISO 25178-72 | 2017年8月 | Geometrical product specifications (GPS) - Surface texture: Areal - Part 72 : XML file format x3p - Spécification géométrique des produits (GPS) - état de surface: Surfacique - Partie 72 : Format de fichier XML x3p | 產品幾何技術規范(GPS)-表面結構:區域-第72部分:XML文件格式x3p | 查看 |
XP E10-100-2 | 2018年10月 | Geometrical product specifications (GPS) - Dimensional measuring methods - Part 2 : evaluation of the geometrical deviations - Spécification géométrique des produits (GPS) - Méthodes de mesurage dimensionnel - Partie 2 : évaluation des écarts géométriques | 產品幾何技術規范(GPS)-尺寸測量方法-第2部分:幾何偏差的評定 | 查看 |
NF EN ISO 14978 | 2018年12月 | Geometrical product specifications (GPS) - General concepts and requirements for GPS measuring equipment - Spécification géométrique des produits (GPS) - Concepts et exigences généraux pour les équipements de mesure GPS | 產品幾何技術規范(GPS)-GPS測量設備的一般概念和要求 | 查看 |
NF EN ISO 17450-4 | 2018年1月 | Geometrical product specifications (GPS) - Basic concepts - Part 4: Geometrical characteristics for quantifying GPS deviations - Spécification géométrique des produits (GPS) - Concepts généraux - Partie 4 : Caractéristiques géométriques pour la quantification des écarts de forme, d'orientation, de position et de battement | 產品幾何技術規范(GPS)-基本概念-第4部分:量化GPS偏差的幾何特性 | 查看 |
NF ISO 1206 | 2018年5月 | Rolling bearings - Needle roller bearings with machined rings - Boundary dimensions, geometrical product specifications (GPS) and tolerance values - Roulements - Roulements à aiguilles avec bagues usinées - Dimensions d'encombrement, spécification géométrique des produits et valeurs de tolérance | 滾動軸承-帶機加工環的滾針軸承-外形尺寸,產品幾何技術規范(GPS)和公差值 | 查看 |
NF EN ISO 5458 | 2018年6月 | Geometrical product specifications (GPS) - Geometrical tolerancing - Pattern and combined geometrical specification - Spécification géométrique des produits (GPS) - Tolérancement géométrique - Partie 2 : tolérancement de position et de motif | 產品幾何技術規范(GPS)-幾何公差-圖形和組合幾何規范 | 查看 |
NF EN ISO 14405-2 | 2019年1月 | Geometrical product specifications (GPS) - Dimensional tolerancing - Part 2 : dimensions other than linear or angular sizes - Spécification géométrique des produits (GPS) - Tolérancement dimensionnel - Partie 2 : dimensions autres que tailles linéaires ou angulaires | 產品幾何技術規范(GPS)-尺寸公差-第2部分:除線性或角度尺寸以外的尺寸 | 查看 |
NF E11-098-1 | 2019年4月 | Geometrical Product Specifications (GPS) - Dimensional measuring equipments - Part 1 : internal micrometer with tow spindles - Metrological and design characteristics - Spécification géométrique des produits (GPS) - Equipements de mesurage dimensionnel - Partie 1 : micromètres d'intérieur à deux touches - Caractéristiques de conception et caractéristiques métrologiques | 產品幾何技術規范(GPS)-尺寸測量設備-第1部分:帶兩個主軸的內徑千分尺-計量和設計特性-產品規范(GPS)-測量尺寸設備 | 查看 |
NF E11-098-2 | 2019年4月 | Geometrical product specifications (GPS) - Dimensional measuring equipments - Part 2 : internal micrometer with tow spindles - Acceptance and reverification - Spécification géométrique des produits (GPS) - équipements de mesurage dimensionnel - Partie 2 : micromètres d'intérieur à deux touches - Réception et vérification périodique | 產品幾何技術規范(GPS)-尺寸測量設備-第2部分:帶兩個主軸的內徑千分尺-驗收和再驗證 | 查看 |
NF EN ISO 25178-600 | 2019年4月 | Geometrical product specifications (GPS) - Surface texture : Areal - Part 600 : metrological characteristics for areal-topography measuring methods - Spécification géométrique des produits (GPS) - état de surface : Surfacique - Partie 600 : Caractéristiques métrologiques pour les méthodes de mesure par topographie surfacique | 產品幾何技術規范(GPS)-表面結構:面狀-第600部分:面狀地形測量方法的計量特性 | 查看 |
NF EN ISO 25178-607 | 2019年4月 | Geometrical product specifications (GPS) - Surface texture : Areal - Part 607 : nominal characteristics of non-contact (confocal microscopy) instruments - Spécification géométrique des produits (GPS) - état de surface : Surfacique - Partie 607 : Caractéristiques nominales des instruments sans contact (microscopie confocale) | 產品幾何技術規范(GPS)-表面結構:區域-第607部分:非接觸(共焦顯微鏡)儀器的標稱特性 | 查看 |
NF EN ISO 20170 | 2019年5月 | Geometrical product specifications (GPS) - Decomposition of geometrical characteristics for manufacturing control - Spécification géométrique des produits (GPS) - Décomposition des caractéristiques géométriques pour le contr?le en fabrication | 產品幾何技術規范(GPS)-制造控制用幾何特性分解 | 查看 |
NF EN ISO 25178-73 | 2019年6月 | Geometrical product specifications (GPS) - Surface texture : Areal - Part 73 : terms and definitions for surface defects on material measures - Spécification géométrique des produits (GPS) - état de surface : surfacique Partie 73 : Mesures matérialisées - Termes et définitions pour défauts de surface | 產品幾何技術規范(GPS)-表面結構:面積-第73部分:材料測量表面缺陷的術語和定義 | 查看 |
NF EN ISO 13385-1 | 2019年9月 | Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1 : design and metrological characteristics of callipers - Spécification géométrique des produits (GPS) - équipement de mesurage dimensionnel - Partie 1: Pieds à coulisse; caractéristiques de conception et caractéristiques métrologiques | 產品幾何技術規范(GPS)-尺寸測量設備-第1部分:卡鉗的設計和計量特性- | 查看 |
NF EN ISO 16610-61/A1 | 2020年1月 | Geometrical product specification (GPS) - Filtration - Part 61 : linear areal filters - Gaussian filters - Amendment 1 - Spécification géométrique des produits (GPS) - Filtrage - Partie 61 : Filtres surfaciques linéaires : Filtres Gaussiens - Amendement 1 | 產品幾何技術規范(GPS)-過濾-第61部分:線性區域?yàn)V波器-高斯濾波器-修改件1-產品規范(GPS)-過濾-第61部分:表面濾波器-高斯濾波器-修改件1 | 查看 |
NF ISO 9628 | 2020年2月 | Rolling bearings - Insert bearings and eccentric locking collars - Geometrical product specifications (GPS) and tolerance values - Roulements - Roulements insert et bagues de blocage excentriques - Spécification géométrique des produits (GPS) et valeurs de tolérances | 滾動軸承-插入軸承和偏心鎖緊圈-產品幾何技術規范(GPS)和公差值 | 查看 |
NF EN ISO 21204 | 2020年3月 | Geometrical product specifications (GPS) - Transition specification - Spécifications géométriques des produits (GPS) - Spécification de transitions définies entre des éléments | 產品幾何技術規范(GPS)-過渡規范 | 查看 |
NF EN ISO 10360-5 | 2020年4月 | Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 5 : coordinate measuring machines (CMMs) using single and multiple stylus contacting probing systems using discrete point and/or scanning measuring mode - Spécification géométrique des produits (GPS) - Essais de réception et de vérification périodique des systèmes à mesurer tridimensionnelles (SMT) - Partie 5 : MMT utilisant des systèmes de palpage à stylet simple ou à stylets multiples utilisant un mode de mesurage par point discret et/ou par scan | 產品幾何技術規范(GPS)-坐標測量系統(CMS)的驗收和再驗證試驗-第5部分:使用離散點和/或掃描測量模式的單針和多針接觸探測系統的坐標測量機(CMM) | 查看 |
NF EN ISO 16610-29 | 2020年4月 | Geometrical product specifications (GPS) - Filtration - Part 29 : linear profile filters : wavelets - Spécification géométrique des produits (GPS) - Filtrage - Partie 29: Filtres de profil linéaires: Ondelettes splines | 產品幾何技術規范(GPS)-過濾-第29部分:線性輪廓濾波器:小波 | 查看 |
NF EN ISO 13385-2 | 2020年5月 | Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2 : design and metrological characteristics of calliper depth gauges - Spécification géométrique des produits (GPS) - équipement de mesurage dimensionnel - Partie 2 : Jauges de profondeur ; caractéristiques de conception et caractéristiques métrologiques | 產品幾何技術規范(GPS)-尺寸測量設備-第2部分:卡尺深度計-設計和計量特性 | 查看 |
NF EN ISO 25178-72/A1 | 2020年9月 | Geometrical product specifications (GPS) - Surface texture : areal - Part 72 : XML file format x3p - Amendment 1 - Spécification géométrique des produits (GPS) - état de surface: Surfacique - Partie 72: Format de fichier XML x3p AMENDEMENT 1 | 產品幾何技術規范(GPS)-表面結構:區域-第72部分:XML文件格式x3p-修訂1 | 查看 |
(注:翻譯僅供參考,具體以原文為準)