測量/測量器具
標準號 | 日期 | 標準名稱(英/法) | 標準名稱(中) | 鏈接 |
NF L72-410 | 1954年2月 | Aircraft instruments with round dials. Temperature gauges. | 機載圓表盤儀表-溫度計 | 查看 |
UTE C46-301 | 1977年7月 | Industrial process measurement and control. Industrial differential pressure transmitter. Qualification standard. | 工業過程測量與控制-工業差壓變送器-資格標準 | 查看 |
NF E11-104 | 1982年12月 | Measuring instruments. Knife edge rules. | 測量儀器。刀鋒法則。 | 查看 |
NF E11-103 | 1983年9月 | Measuring instruments. Steel squares. | 測量儀器-鋼方格 | 查看 |
NF E11-105 | 1983年9月 | Measuring instruments. Steel straight edges. | 測量儀器。鋼直邊。 | 查看 |
UTE C46-302 | 1983年9月 | Industrial-process measurement and control. Acceptance tests for absolute pressure, relative pressure, and differential pressure transmitters. | 工業-過程測量與控制.絕對壓力、相對壓力和差壓變送器的驗收試驗 | 查看 |
NF E11-301 | 1984年6月 | Measuring instruments. Precision spirit levels. | 測量儀器。精確的精神水平。 | 查看 |
NF M62-210 | 1984年7月 | Limiting enclosures. Method of control of the leak rate per hour. Enclosures of classes 1 and 2. Method of measurement of the increase of the oxygen titre in volume. | 限制機柜。每小時泄漏率控制方法。1類和2類的外殼。體積氧滴定增加量的測量方法。 | 查看 |
NF E11-303 | 1985年1月 | Angle measuring instruments. Autocollimators. | 角度測量儀器-自準直儀 | 查看 |
NF E11-304 | 1985年3月 | Measuring instruments. Sine bars and tables. | 測量儀器。正弦條和正弦表。 | 查看 |
UTE C46-405 | 1985年5月 | Provisional requirements. Industrial-process measurement and control. Display controllers with ajustable functions. | 臨時要求。工業過程測量與控制。具有可調功能的顯示控制器。 | 查看 |
UTE C46-406 | 1985年9月 | Provisional requirements. Industrial-process measurement and control. Temperature and physical quantities indicators with adjustable configuration. | 臨時要求-工業過程測量與控制-配置可調溫度和物理量指示器 | 查看 |
NF E11-300 | 1986年2月 | Precision angle measuring instruments. General. | 精密角度測量儀器??倓t。 | 查看 |
E11-016 | 1987年4月 | Length measuring instruments. Fringe counting, laser source interferometers. | 長度測量儀器-條紋計數、激光源干涉儀。 | 查看 |
NF E11-305 | 1988年7月 | Angle measuring instruments. Material measure. - Instruments de mesurage des angles | 角度測量儀器。材料測量。-角度測量儀器 | 查看 |
NF C42-711 | 1989年10月 | Luminance meters. Determination of metrological characteristics, classification according to the latter, calibration, check of the main characteristics liable to vary with time. - Luminancemètres | 亮度計-計量特性測定-根據隨時間而變化的主要特性的最近狀況、校準和檢查結果測定計量特性并進行分類 | 查看 |
UTE C46-408 | 1989年11月 | Provisional requirements. Industrial-process measurement and control. Cabinet mounted two wire temperature converters., transmitters, with adjustable configuration. | 臨時要求。工業過程測量與控制??烧{(diào)配置柜式雙線溫度轉換器和變送器。 | 查看 |
UTE C46-407 | 1989年3月 | Provisional requirements. Industrial-process measurement and control. Four wire temperature converters-transmitters, with adjustable configuration. | 臨時要求。工業過程測量與控制。四線式溫度轉換器變送器,配置可調。 | 查看 |
NF E11-029 | 1991年5月 | Steel gauges. Screw ring gauges. Diameter to 300 mm. - Calibres en acier | 鋼制測量儀器。螺旋環規。直徑為300 mm。 | 查看 |
UTE C46-409 | 1991年6月 | Provisional requirements. Industrial-process measurement and control. Temperature and physical variables display controllers with adjustable functions and discontinuous output signals. | 臨時要求。工業過程測量與控制。溫度和物理變量顯示控制器具有可調的功能和不連續的輸出信號。 | 查看 |
NF E11-101 | 1992年12月 | Measuring instruments. Measuring plates. - Instruments de mesurage | 測量儀器。測量板。 | 查看 |
NF E11-102 | 1992年12月 | Measuring instruments. Vee blocks. - Instruments de mesurage | 測量儀表-V 形塊規-測量儀器 | 查看 |
NF ISO 9960-1 | 1992年12月 | Draughting instruments with or without graduation. Part 1 : draughting scale rulers. | 有刻度或無刻度的繪圖儀器。第1部分:制圖比例尺。 | 查看 |
NF E11-090 | 1993年12月 | Measuring instruments. External and internal micrometers. Special design. - Instruments de mesurage | 測量儀器。外徑和內徑千分尺。特殊設計。 | 查看 |
NF E11-099 | 1993年12月 | Length measuring instruments. Internal micrometers with 3 spindles. Specifications. Test methods. - Instruments de mesurage de longueur | 長度測量儀器。三軸內徑千分尺。規范。試驗方法。 | 查看 |
NF EN 472 | 1994年12月 | Pressure gauges. Vocabulary. - Manomètres | 壓力表-詞匯 | 查看 |
X07-011 | 1994年12月 | Metrology. Tests. Company metrology. Checking report of means of measurement. - Métrologie - Essais | 計量學。測驗。公司計量。測量方法檢查報告。 | 查看 |
E90-350-1 | 1994年7月 | Methods for the calibration of vibration and shock pick-ups. Part 1 : primary vibration calibration by laser interferometry. | 振動和沖擊傳感器的校準方法。第1部分:用激光干涉法進行一次振動校準。 | 查看 |
E90-350-10 | 1994年7月 | Methods for the calibration of vibration and shock pick-ups. Part 10 : primary calibration by high impact shocks. | 振動和沖擊傳感器的校準方法。第10部分:高沖擊沖擊的初步校準。 | 查看 |
E90-350-12 | 1994年7月 | Methods for the calibration of vibration and shock pick-ups. Part 12 : testing of transverse shock sensitivity. | 振動和沖擊傳感器的校準方法。第12部分:橫向沖擊敏感性試驗。 | 查看 |
E90-350-13 | 1994年7月 | Methods for the calibration of vibration and shock pick-ups. Part 13 : testing of base strain sensitivity. | 振動和沖擊傳感器的校準方法。第13部分:基底應變敏感性試驗。 | 查看 |
E90-350-14 | 1994年7月 | Methods for the calibration of vibration and shock pick-ups. Part 14 : resonance frequency testing of undamped accelerometers on a steel block. | 振動和沖擊傳感器的校準方法。第14部分:鋼塊上無阻尼加速度計的共振頻率試驗。 | 查看 |
E90-350-16 | 1994年7月 | Methods for the calibration of vibration and shock pick-ups. Part 16 : testing of mounting torque sensitivity. | 振動和沖擊傳感器的校準方法。第16部分:安裝扭矩靈敏度試驗。 | 查看 |
E90-350-17 | 1994年7月 | Methods for the calibration of vibration and shock pick-ups. Part 17 : testing of fixed temperature sensitivity. | 振動和沖擊傳感器的校準方法。第17部分:固定溫度靈敏度試驗。 | 查看 |
E90-350-18 | 1994年7月 | Methods for the calibration of vibration and shock pick-ups. Part 18 : testing of transient temperature sensitivity. | 振動和沖擊傳感器的校準方法。第18部分:瞬態溫度敏感性試驗。 | 查看 |
E90-350-7 | 1994年7月 | Methods for the calibration of vibration and shock pick-ups. Part 7 : primary calibration by centrifuge. | 振動和沖擊傳感器的校準方法。第7部分:離心機初步校準。 | 查看 |
E90-350-8 | 1994年7月 | Methods for the calibration of vibration and shock pick-ups. Part 8 : primary calibration by dual centrifuge. | 振動和沖擊傳感器的校準方法。第8部分:雙離心機初步校準。 | 查看 |
NF EN 61152 | 1994年7月 | Dimensions of metal-sheathed thermometer elements. | 金屬護套溫度計元件的尺寸。 | 查看 |
FD X07-012 | 1995年11月 | Metrology. Company metrology. Calibration certificate of the measuring means. - Métrologie | 計量學。企業計量。測量裝置的校準證書。 | 查看 |
FD X07-013 | 1996年12月 | Metrology. Company metrology. Criteria of choice between verification and calibration, use and storage of the measurement results. - Métrologie | 計量學。公司計量。檢定和校準之間的選擇標準,測量結果的使用和儲存。 | 查看 |
NF EN 61094-4 | 1996年4月 | Measurement microphones. Part 4 : specifications for working standard microphones. | 測量麥克風。第4部分:工作標準話筒規范。 | 查看 |
NF ISO 11095 | 1996年5月 | Linear calibration using reference materials. | 使用標準物質進行線性校準。 | 查看 |
FD X07-017-2 | 1997年12月 | Metrology. Calibration and verification procedure for non-automatic weighing instruments. Part 2 : calibration. - Métrologie | 計量學-非自動稱重儀器的校準和驗證程序-第2部分:校準 | 查看 |
FD X07-018 | 1997年12月 | Metrology. Company metrology. Data sheet for measuring, inspection and test equipment. - Métrologie | 計量學。公司計量。測量、檢驗和試驗設備數據表, | 查看 |
NF EN 837-1 | 1997年4月 | Pressure gauges. Part 1 : Bourdon tube pressure gauges. Dimensions, metrology, requirements and testing. | 壓力表。第1部分:波登管壓力計。尺寸、計量、要求和試驗。 | 查看 |
NF EN 837-3 | 1997年4月 | Pressure gauges. Part 3 : diaphragm and capsule pressure gauges. Dimensions, metrology, requirements and testing. | 壓力表-第3部分:膜片和膜盒壓力計-尺寸、計量、要求和試驗 | 查看 |
NF EN 837-2 | 1997年5月 | Pressure gauges. Part 2 : selection and installation recommendations for pressure gauges. | 壓力表-第2部分:壓力表的選擇和安裝建議 | 查看 |
NF ISO 11843-1 | 1998年12月 | Capacity of detection - Part 1 : terms and definitions | 檢測能力-第1部分:術語和定義 | 查看 |
NF ISO 1757 | 1998年12月 | Personal photographic dosemeters. | 個人攝影劑量計。 | 查看 |
NF EN 60618/A2 | 1998年2月 | Inductive voltage dividers. | 感應分壓器。 | 查看 |
NF EN 61580-3 | 1998年2月 | Methods of measurement for waveguides. Part 3 : variation of group delay. | 波導測量方法。第三部分:群時延的變化。 | 查看 |
FD X07-021 | 1999年10月 | Fundamental standards - Metrology and application of the statistics - Help to the process for the estimation and the use of the measurement and test results uncertainty - Normes fondamentales | 基礎標準-計量學和統計學的應用-有助于處理對測量和試驗結果不定性的評定和使用 | 查看 |
NF ISO 3105 | 1999年5月 | Glass capillary kinematic viscometers. Specifications and operating instructions. | 玻璃毛細管運動粘度計-規范和操作說明 | 查看 |
NF EN ISO 15212-1 | 1999年8月 | Oscillation-type density meters - Part 1 : laboratory instruments | 擺動型密度計-第1部分:實驗室儀器 | 查看 |
NF E15-100 | 2000年11月 | Industrial pressure gauges and thermometers - Metallic indicator pressure gauges and thermometers - Pressure gauges and thermometers with control function - Manomètres et thermomètres industriels | 工業壓力計和溫度計-金屬指示器壓力計和溫度計-帶控制功能的壓力計和溫度計 | 查看 |
FD X07-019 | 2000年12月 | Metrology - Customer/supplier relations in metrology - Métrologie | 計量學-計量學中的客戶/供應商關系 | 查看 |
NF EN ISO 1042 | 2000年9月 | Laboratory glasseware - One-mark volumetric flasks - Verrerie de laboratoire | 實驗室玻璃器皿-單標記容量瓶 | 查看 |
NF ISO 11843-2 | 2000年9月 | Capability of detection - Part 2 : methodology in the linear calibration case | 檢測能力-第2部分:線性校準情況下的方法 | 查看 |
FD V03-116 | 2001年6月 | Analysis of agricultural and food products - Guide for application of metrological data | 農產品和食品分析-計量數據應用指南 | 查看 |
NF EN 61518 | 2001年9月 | Mating dimensions between differential pressure (type) measuring instruments and flanged-on shut-off devices up to 413 bar (41,3 MPa) | 壓差(類型)測量儀表和法蘭式截止裝置之間的配合尺寸,最大413 bar(41-3 MPa) | 查看 |
FD X07-028 | 2002年10月 | Metrology - Calibration and verification procedure for thermometers - Estimation of the uncertainties on temperature measurements - Métrologie | 計量學-溫度計的校準和驗證程序-溫度測量不確定度的估計 | 查看 |
NF EN 13485 | 2002年1月 | Thermometers for measuring the air and product temperature for the transport, storage and distribution of chilled, frozen, deep-frozen/quick-frozen food and ice cream - Tests, performance, suitability - Thermomètres pour le mesurage de la température de l'air et des produits pour le transport, l'entreposage et la distribution de denrées alimentaires réfrigérées, congelées, surgelées et des crèmes glacées | 冷藏、冷凍、深凍/速凍食品和冰淇淋運輸、儲存和分配用空氣和產品溫度測量溫度計-試驗、性能、適用性 | 查看 |
NF EN 13486 | 2002年1月 | Temperature recorders and thermometers for the transport, storage and distribution of chilled, frozen, deep-frozen/quick-frozen food and ice cream - Periodic verification - Enregistreurs de température et thermomètres pour le transport, l'entreposage et la distribution des denrées alimentaires réfrigérées, congelées et surgelées et des crèmes glacées | 冷藏、冷凍、速凍/速凍食品和冰淇淋運輸、儲存和配送用溫度記錄器和溫度計—定期檢驗 | 查看 |
NF EN 13190 | 2002年3月 | Dial thermometers | 表盤溫度計 | 查看 |
NF EN ISO 15212-2 | 2002年6月 | Oscillation-type density meters - Part 2 : process instruments for homogeneous liquids | 振蕩式密度計-第2部分:均質液體工藝儀表 | 查看 |
NF EN 13509 | 2003年10月 | Cathodic protection measurement techniques | 陰極保護測量技術 | 查看 |
NF EN ISO 8655-1 | 2003年4月 | Piston-operated volumetric apparatus - Part 1 : terminology, general requirements and user recommendations | 活塞式容積儀-第1部分:術語,一般要求和用戶建議 | 查看 |
NF EN ISO 8655-2 | 2003年4月 | Piston-operated volumetric apparatus - Part 2 : piston pipettes | 活塞式容量儀器-第2部分:活塞移液管 | 查看 |
NF EN ISO 8655-3 | 2003年4月 | Piston-operated volumetric apparatus - Part 3 : piston burettes | 活塞式體積測量儀-第3部分:活塞滴定管 | 查看 |
NF EN ISO 8655-4 | 2003年4月 | Piston-operated volumetric apparatus - Part 4 : dilutors | 活塞式容量儀-第4部分:稀釋器 | 查看 |
NF EN ISO 8655-5 | 2003年4月 | Piston-operated volumetric apparatus - Part 5 : dispensers | 活塞式容量計-第5部分:分配器 | 查看 |
NF EN ISO 8655-6 | 2003年4月 | Piston-operated volumetric apparatus - Part 6 : gravimetric methods for the determination of measurement error | 活塞式容積儀-第6部分:測量誤差測定的重量分析法 | 查看 |
FD P94-447-1 | 2003年6月 | Rock - Guidelines for measurement of ground vibrations due to geotechnical works - Part 1 : vibration from blasting - Roches | 巖石-巖土工程引起的地面振動測量指南-第1部分:爆破振動 | 查看 |
NF EN ISO 10012 | 2003年9月 | Measurement management systems - Requirements for measurement processes and measuring equipment - Systèmes de management de la mesure | 測量管理系統-測量過程和測量設備的要求 | 查看 |
NF ISO 11843-3 | 2003年9月 | Capability of detection - Part 3 : methodology for determination of the critical value for the response variable when no calibration data are used | 檢測能力-第3部分:無校準數據可采用情況下測定反應變量關鍵值 | 查看 |
NF ISO 14695 | 2003年9月 | Industrial fans - Method of measurement of fan vibration - Ventilateurs industriels | 工業風扇-風扇振動的測量方法-通風設備工業 | 查看 |
FD X07-022 | 2004年12月 | Metrology and statistical applications - Use of uncertainties of measurements : presentation of some cases and common practices - Métrologie et applications de la statistique | 計量學和統計應用-測量不確定度的使用:一些案例和通用實踐的介紹 | 查看 |
FD X43-130 | 2004年12月 | Stationary source emissions - Guidance for the estimation of the uncertainty of measurement associated with automatic gas measuring systems - QAL 1 Quality check (case of gaseous constituants) - émissions de sources fixes | 固定源排放-與自動氣體測量系統有關的測量不確定度的估計指南-QAL 1質量檢查(氣體成分的情況) | 查看 |
NF ISO 11843-4 | 2004年3月 | Capability of detection - Part 4 : methodology for comparing the minimum detectable value with a given value | 檢測能力-第4部分:最小可檢測值與給定值的比較方法 | 查看 |
FD X15-111 | 2004年5月 | Measurement of air moisture - General information on measuring instruments - Selection and use guide - Mesure de l'humidité de l'air | 空氣濕度的測量-測量儀器的一般信息-選擇和使用指南 | 查看 |
NF EN 60746-1 | 2004年5月 | Expression of performance of electrochemical analyzers - Part 1 : general | 電化學分析儀性能的表示-第1部分:總則 | 查看 |
NF EN 60746-2 | 2004年5月 | Expression of performance of electrochemical analyzers - Part 2 : pH value | 電化學分析儀性能的表示-第2部分:pH值 | 查看 |
NF EN 60746-3 | 2004年5月 | Expression of performance of electrochemical analyzers - Part 3 : electrolytic conductivity | 電化學分析儀性能的表達形式-第3部分:電解電導率 | 查看 |
XP ISO/TS 21749 | 2005年10月 | Measurement and uncertainty for metrological applications - Repeated measurements and nested experiments - Incertitude de mesure pour les applications en métrologie | 計量應用的測量和不確定度-重復測量和嵌套實驗 | 查看 |
FD X07-007 | 2005年12月 | Metrology - Implementation guide for NF EN ISO 10012 "Measurement management systems - Requirements for measurement processes and measuring equipment" - Design development, control and improvement of measurement or test processes - Métrologie | 計量學-NF EN ISO 10012“測量管理系統-測量過程和測量設備的要求”的實施指南-測量或試驗過程的設計開發,控制和改進 | 查看 |
NF EN 14268 | 2005年12月 | Irrigation techniques - Meters for irrigation water - Techniques d'irrigation | 灌溉技術-灌溉水表 | 查看 |
FD X15-120 | 2005年1月 | Measurement of air moisture - Expression of uncertainties - Study of concrete cases - Mesure de l'humidité de l'air | 空氣濕度測量-不確定度的表達式-混凝土案例研究 | 查看 |
FD ISO/TR 22971 | 2005年4月 | Accuracy (trueness and precision) of measurement methods and results - Practical guidance for use of ISO 5725-2:1994 in designing, implementing and statistically analysing interlaboratory repeatability and reproducibility results - Exactitude (justesse et fidélité) des résultats et méthodes de mesure | 測量方法和結果的準確度(真實度和精密度)-在設計,實施和統計分析實驗室間重復性和再現性結果中使用ISO 5725-2:1994的實用指南-測量結果和方法的準確度 | 查看 |
NF EN ISO 385 | 2005年9月 | Laboratory glassware - Burettes - Verrerie de laboratoire | 實驗室玻璃器皿-滴定管 | 查看 |
NF EN ISO 4788 | 2005年9月 | Laboratory glassware - Graduated measuring cylinders - Verrerie de laboratoire | 實驗室玻璃器皿-分度量筒 | 查看 |
FD X07-014 | 2006年11月 | Metrology - Optimisation of measuring equipment calibration frequencies (metrological confirmation) - Métrologie | 計量學-測量設備校準頻率的優化(計量確認) | 查看 |
NF EN ISO 8655-7 | 2006年2月 | Piston-operated volumetric apparatus - Part 7 : non-gravimetric methods for the assessment of equipment performance | 活塞式體積測量儀-第7部分:用于設備性能評定的非重力法 | 查看 |
NF EN 15042-1 | 2006年6月 | Thickness measurement of coatings and characterization of surfaces with surface waves - Part 1 : guide to determination of elastic constants, density and thickness of films by laser induced surface acoustic waves | 用表面波測量涂層厚度和表面特性第1部分:用激光誘導的表面波測定薄膜的彈性常數、密度和厚度指南 | 查看 |
NF EN ISO 835 | 2007年7月 | Laboratory glassware - Graduated pipettes - Verrerie de laboratoire | 實驗室玻璃器皿-刻度移液管 | 查看 |
NF EN ISO 648 | 2008年12月 | Laboratory glassware - Single-volume pipettes - Verrerie de laboratoire | 實驗室玻璃器皿-單一容量吸液管 | 查看 |
NF ISO 11843-5 | 2008年7月 | Capability of detection - Part 5 : methodology in the linear and non-linear calibration cases | 檢測能力-第5部分:線性和非線性校準情況下的方法 | 查看 |
NF EN 61869-1 | 2009年12月 | Instrument transformers - Part 1 : general requirements | 儀表變壓器-第1部分:一般要求 | 查看 |
FD CEN/TR 15068 | 2009年8月 | Gas welding equipment - Measurement of noise emitted by blowpipe for welding, cutting, heating, brazing and soldering - Measurement method - Matériel de soudage aux gaz | 氣體焊接設備-焊接、切割、加熱、釬焊和焊接用吹管發出噪音的測量-測量方法 | 查看 |
NF E02-310 | 2010年12月 | Steel gauges - Morse taper plug gauges - Calibres en acier | 鋼制測量儀器-莫氏錐度塞規 | 查看 |
NF E02-311 | 2010年12月 | Steel gauges - Morse taper plug gauges with tang - Calibres en acier | 鋼制測量儀器-帶柄腳的莫氏錐度塞規 | 查看 |
NF E02-312 | 2010年12月 | Steel gauges - Morse taper ring gauges - Calibres en acier | 鋼制測量儀器-莫氏錐度環規 | 查看 |
NF E02-313 | 2010年12月 | Steel gauges - Morse taper ring gauges with tang - Calibres en acier | 鋼制測量儀器-莫氏錐度環規-第1部分:口徑 | 查看 |
NF EN 1915-3+A1 | 2010年12月 | Aircraft ground support equipment - General requirements - Part 3 : vibration measurement methods and reduction - Matériels au sol pour aéronefs | 航空地面輔助設備-一般要求-第3部分:振動的測量和減振 | 查看 |
NF EN 61988-2-3 | 2010年4月 | Plasma display panels - Part 2-3 : measuring methods - Image quality : defects and degradation | 等離子體顯示板-第2-3部分:測量方法圖像質量:缺陷和退化 | 查看 |
NF E02-315 | 2011年12月 | Steel gauges - Metric taper plug gauges with tang - Calibres en acier | 鋼制測量儀器-帶柄腳的米制錐形塞規 | 查看 |
NF E02-317 | 2011年12月 | Steel gauges - Metric taper ring gauges with tang - Calibres en acier | 鋼制測量儀器-米制榫式錐度環規 | 查看 |
NF EN ISO 4787 | 2011年5月 | Laboratory glassware - Volumetric instruments - Methods for testing of capacity and for use - Verrerie de laboratoire | 實驗室玻璃儀器-容積測定儀器-容量測試方法和使用方法 | 查看 |
NF EN 62562 | 2011年6月 | Cavity resonator method to measure the complex permittivity of low-loss dielectric plates | 測量低損耗介質板復介電常數的腔諧振器法 | 查看 |
NF P94-063 | 2011年6月 | Soils : investigation and testing - Compaction quality control - Constant energy dynamic penetration test method - Principle and method for calibrating penetrodensitographs - Exploitation of results - Interpretation - Sols : reconnaissance et essais | 土壤:調查和試驗-壓實質量控制-恒能量動力觸探試驗方法-校準貫入密度儀的原理和方法-結果的利用-解釋 | 查看 |
FD GUIDE ISO/IEC 98-1 | 2011年8月 | Uncertainty of measurement - part 1 : introduction to the expression of uncertainty in measurement | 測量不確定度-第1部分:測量不確定度表示法簡介 | 查看 |
NF EN ISO 376 | 2011年8月 | Metallic materials - Calibration of force-proving instruments used for the verification of uniaxial testing machines - Matériaux métalliques | 金屬材料-單軸試驗機驗證用測力儀的校準 | 查看 |
NF ISO/IEC GUIDE 99 | 2011年8月 | International vocabulary of metrology - Basic and general concepts and associated terms (VIM) - Vocabulaire international de métrologie | 國際計量詞匯-基本和一般概念及相關術語(VIM) | 查看 |
NF E81-010 | 2012年4月 | Blanking and stamping - Burr on blanked or punched metallic parts - Maximum allowable burr height and measuring method - Découpage et emboutissage | 沖裁和沖壓-沖裁或沖壓金屬零件上的毛刺-最大允許毛刺高度和測量方法 | 查看 |
NF EN ISO 8503-3 | 2012年4月 | Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 3 : method for the calibration of ISO surface profile comparators and for the determination of surface profile - Focusing microscope procedure - Préparation des subjectiles d'acier avant application de peintures et de produits assimilés | 涂料和相關產品應用前鋼基體的制備-噴丸處理鋼基體的表面粗糙度特性-第3部分:ISO表面輪廓比較儀的校準方法和表面輪廓的測定方法-顯微鏡的調焦規程 | 查看 |
NF EN ISO 8503-4 | 2012年4月 | Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 4 : method for the calibration of ISO surface profile comparators and for the determination of surface profile - Stylus instrument procedure - Préparation des subjectiles d'acier avant application de peintures et de produits assimilés | 涂裝油漆和有關產品前鋼材預處理-噴射清理鋼材的表面粗糙度特性-第4部分:ISO表面輪廓比較儀的校準方法和表面輪廓的測定方法-觸針儀法 | 查看 |
FD X07-023 | 2012年5月 | Metrology - Evaluation of measurement uncertainty using Monte-Carlo simulations - Principles and application of the Supplement 1 to the GUM - Métrologie | 計量-用蒙特卡羅模擬對測量不確定度的評定-膠補1的原理和應用 | 查看 |
NF S54-042 | 2012年6月 | Child use and care articles - Bath thermometers - Specifications and marks - Articles de puériculture | 兒童使用和保育用品-浴室溫度計-規范和標記 | 查看 |
NF EN ISO 81060-1 | 2012年8月 | Non-invasive sphygmomanometers - Part 1 : requirements and test methods for non-automated measurement type | 無創血壓計-第1部分:非自動測量類型的要求和試驗方法 | 查看 |
NF ISO/IEC GUIDE 98-4 | 2013年10月 | Uncertainty of measurement - Part 4 : role of measurement uncertainty in conformity assessment | 測量不確定度第4部分:測量不確定度在合格評定中的作用 | 查看 |
NF EN ISO 9513 | 2013年2月 | Metallic materials - Calibration of extensometer systems used in uniaxial testing - Matériaux métalliques | 金屬材料-單軸向試驗用引伸計的校準 | 查看 |
NF EN 61094-8 | 2013年4月 | Measurement microphones - Part 8 : methods for determining the free-field sensitivity of working standard microphones by comparison - Electroacoustique | 測量話筒-第8部分:通過比較測定工作標準話筒自由場靈敏度的方法 | 查看 |
FD X15-140 | 2013年5月 | Measurement of air moisture - Climatic and thermostatic chambers - Characterisation and verification - Mesure de l'humidité de l'air | 空氣濕度的測量-氣候和恒溫室-特性和驗證 | 查看 |
NF ISO 3567 | 2013年6月 | Vacuum gauges - Calibration by direct comparison with a reference gauge - Manomètres | 真空計-與基準壓力計直接比較的校準 | 查看 |
NF E18-100 | 2013年7月 | Time-temperature indicators and integrators - Tests and performance - Indicateurs et intégrateurs de temps/température | 時間溫度指示器和積分器-試驗和性能 | 查看 |
NF EN 62629-22-1 | 2013年9月 | 3D Display Devices - Part 22-1 : measuring methods for autostereoscopic displays - Optical | 三維顯示設備-第22-1部分:自動立體顯示的測量方法 | 查看 |
NF E02-314 | 2014年12月 | Steel gauges - Plug gauges for 5 % tapers - Calibres en acier | 鋼制測量儀器-5%錐度用塞規 | 查看 |
NF E02-316 | 2014年12月 | Steel gauges - 5 % taper rings with tapped hole - Calibres en acier | 鋼制測量儀器-帶螺紋孔的5%錐形環-口徑 | 查看 |
NF E02-318 | 2014年12月 | Steel gauges - 7/24 taper plug gauges - Calibres en acier | 鋼制測量儀器-7/24錐形塞規 | 查看 |
NF E02-319 | 2014年12月 | Steel gauges - 7/24 taper ring gauges - Calibres en acier | 鋼制測量儀器-7/24錐形環規 | 查看 |
NF EN 61869-4 | 2014年12月 | Instrument transformers - Part 4 : additional requirements for combined transformers | 儀表用變壓器-第4部分-組合式變壓器的附加要求 | 查看 |
NF EN 10049 | 2014年1月 | Measurement of roughness average Ra and peak count RPc on metallic flat products | 金屬扁平制品的平均粗糙程度Ra和最大數量RPc的測量 | 查看 |
NF ISO/IEC GUIDE 98-3 | 2014年7月 | Uncertainly of measurement - Part 3 : guide to the expression of uncertainly in measurement (GUM : 1995) - Incertitude de mesure - Partie 3 : guide pour l'espression de l'incertitude de mesure (GUM : 1995) | 測量不確定度-第3部分:測量不確定度表示指南(GUM:1995) | 查看 |
NF EN 62419 | 2015年11月 | Control technology - Rules for the designation of measuring instruments - Technologies de mesure et de commande | 控制技術-測量儀器的命名規則 | 查看 |
NF E11-021 | 2015年12月 | Steel gauges - Plain plug gauges (horology series) - Diameters from 0,1 mm to 3 mm - Calibres en acier - Tampons lisses (série horlogère) - Diamètres de 0,1 mm à 3 mm | 鋼制測量儀器-普通塞規(鐘表系列)-直徑0-1mm至3mm | 查看 |
FD X07-029-3 | 2015年4月 | Metrology - Thermometer calibration and verification procedure - Part 3 : calibration and verification procedure for liquid in glass thermometers - Métrologie - Procédure d'étalonnage et de vérification des thermomètres - Partie 3 : procédure d'étalonnage et de vérification des thermomètres à dilatation de liquide | 計量學-溫度計校準和驗證程序-第3部分:玻璃管液體溫度計的校準和驗證程序 | 查看 |
NF EN 45501 | 2015年6月 | Metrological aspects of non-automatic weighing instruments | 非自動稱重儀器的計量學方面 | 查看 |
NF EN ISO 3819 | 2016年3月 | Laboratory glassware - Beakers - Verrerie de laboratoire | 實驗室玻璃器皿-燒杯 | 查看 |
NF EN ISO 384 | 2016年3月 | Laboratory glass and plastics ware - Principles of design and construction of volumetric instruments - Matériels de laboratoire en verre ou en plastique | 實驗室玻璃和塑料器皿-體積儀器的設計和構造原則 | 查看 |
NF ISO 21909-1 | 2016年3月 | Passive neutron dosimetry systems - Part 1 : performance and test requirements for personal dosimetry - Systèmes dosimétriques passifs pour les neutrons - Partie 1 : exigences de fonctionnement et d'essai pour la dosimétrie individuelle | 無源專用中子劑量計-第1部分:個人劑量測定的性能和試驗要求 | 查看 |
NF ISO 2954 | 2016年8月 | Mechanical vibration of rotating and reciprocating machinery - Requirements for instruments for measuring vibration severity - Vibrations mécaniques des machines tournantes ou alternatives - Exigences relatives aux appareils de mesure de l'intensité vibratoire | 旋轉式和往復式機器的振動-對測量振動烈度儀器的要求 | 查看 |
NF EN ISO 8041-1 | 2017年5月 | Human response to vibration - Measuring instrumentation - Part 1 : general purpose vibration meters - Réponse des individus aux vibrations - Appareillage de mesure - Partie 1 : Instrument de mesure à usage général | 人對振動的反應-測量儀器-第1部分:通用振動計 | 查看 |
NF ISO 21748 | 2017年7月 | Guidance for the use of repeatability, reproducibility and trueness estimates in measurement uncertainty evaluation - Lignes directrices relatives à l'utilisation d'estimations de la répétabilité, de la reproductibilité et de la justesse dans l'évaluation de l'incertitude de mesure | 測量不確定估計的重復性、再現性和真實評估值的使用的指南 | 查看 |
NF ISO 11843-5/A1 | 2017年9月 | Capability of detection - Part 5 : methodology in the linear and non-linear calibration cases - Amendment 1 - Capacité de détection - Partie 5 : Méthodologie des étalonnages linéaire et non linéaire - Amendement 1 | 檢測能力-第5部分:線性和非線性校準情況下的方法-修訂1 | 查看 |
FD X07-039 | 2018年10月 | Role of measurement uncertainty in conformity assessment - Implementation of NF ISO/IEC Guide 98-4 - Illustration through industrial case studies - R?le de l'incertitude de mesure dans l'évaluation de la conformité - Mise en ?uvre de la norme NF ISO/IEC Guide 98-4 - Illustration au travers d'études de cas industriels | 測量不確定度在合格評定中的作用-NF ISO/IEC指南98-4的實施-通過工業案例研究的說明 | 查看 |
NF EN IEC 62828-1 | 2018年2月 | Reference conditions and procedures for testing industrial and process measurement transmitters - Part 1 : general procedures for all types of transmitters - Conditions de référence et procédures pour l'essai des transmetteurs de mesure industrielle et de processus - Partie 1 : procédures générales pour tous les types de transmetteurs | 工業和工藝測量變送器試驗的參考條件和程序-第1部分:所有類型變送器的一般程序 | 查看 |
NF EN IEC 62828-2 | 2018年2月 | Reference conditions and procedures for testing industrial and process measurement transmitters - Part 2 : specific procedures for pressure transmitters - Conditions de référence et procédures pour l'essai des transmetteurs de mesure industrielle et de processus - Partie 2 : procédures spécifiques pour les transmetteurs de pression | 工業和過程測量變送器試驗的參考條件和程序第2部分:壓力變送器的特殊程序 | 查看 |
NF EN 12261 | 2018年3月 | Gas meters - Turbine gas meters - Compteurs de gaz - Compteurs de gaz à turbine | 燃?xì)獗?燃?xì)廨啓C燃?xì)獗?/td> | 查看 |
NF EN 61869-6 | 2018年3月 | Instrument transformers - Part 6 : additional general requirements for low-power instrument transformers - Transformateurs de mesure - Partie 6 : Exigences générales supplémentaires concernant les transformateurs de mesure de faible puissance | 儀表變壓器-第6部分:小功率儀表變壓器的附加一般要求 | 查看 |
NF EN IEC 62828-3 | 2018年6月 | Reference conditions and procedures for testing industrial and process measurement transmitters - Part 3 : specific procedures for temperature transmitters - Conditions de référence et procédures pour l'essai des transmetteurs de mesure industrielle et de processus - Partie 3 : procédures spécifiques pour les transmetteurs de température | 工業和過程測量變送器試驗的參考條件和程序-第3部分:溫度變送器的特殊程序 | 查看 |
NF E11-015 | 2019年12月 | Geometrical product specifications (GPS) - Dimensional measuring equipment : measuring rods with spherical ends - Design and metrological requirements - Spécification géométrique des produits (GPS) - Instruments de mesurage dimensionnel : broches à bouts sphériques - Caractéristiques de conception et caractéristiques métrologiques | 幾何產品規范(GPS)-尺寸測量設備:球端標準參考測量桿-設計和劑量要求 | 查看 |
NF EN ISO 7971-2 | 2019年3月 | Cereals - Determination of bulk density, called mass per hectolitre - Part 2 : method of traceability for measuring instruments through reference to the international standard instrument - Céréales - Détermination de la masse volumique, dite masse à l'hectolitre - Partie 2 : Méthode de raccordement des instruments de mesure à l'étalon international | 谷物-稱為每公頃質量的堆積密度的測定-第2部分:通過參考國際標準儀器測量儀器的可追溯性方法 | 查看 |
FD ISO/TR 230-11 | 2019年6月 | Test code for machine tools - Part 11 : measuring instruments suitable for machine tool geometry tests - Code d'essai des machines-outils - Partie 11 : instruments de mesure compatibles avec les essais de géométrie des machines-outils | 機床試驗規程-第11部分:適用于機床幾何試驗的測量儀器 | 查看 |
FD X07-041 | 2019年7月 | Monitoring of measuring instruments - Inter-Instrument Comparisons (C2l) - Conditions of implementation and limits of application - Surveillance des instruments de mesure - Les Comparaisons Inter-Instruments (C2l) - Conditions de mises en oeuvre et limites d'application | 測量儀器的監測-儀器間比較(C2l)-實施條件和應用限制 | 查看 |
NF E11-020 | 2020年4月 | Length measuring instruments - Limit gauges and working standards - Terminology - Shortened designation - Instruments de mesurage de longueur - Calibres à limites et étalons de travail - Terminologie - Désignation abrégée | 長度測量儀器-極限量規和工作標準-術語-縮短名稱 | 查看 |
NF E11-011 | 2020年8月 | Dimensional measuring equipment - Plain ring standard gauges, plain plug standard gauges and standard discs - Instruments de mesurage de longueur - Bagues lisses, tampons lisses et disques étalons | 尺寸測量設備-平環標準量規,平塞標準量規和標準圓盤 | 查看 |
NF ISO 5725-2 | 2020年8月 | Accuracy (trueness and precision) of measurement methods and results - Part 2 : basic method for the determination of repeatability and reproducibility of a standard measurement method - Exactitude (justesse et fidélité) des résultats et méthodes de mesure - Partie 2 : Méthode de base pour la détermination de la répétabilité et de la reproductibilité d'une méthode de mesure normalisée | 測量方法和結果的準確度(正確度和精密度)-第2部分:測定標準測量方法的重復性和再現性的基本方法 | 查看 |
NF EN IEC 62828-4 | 2020年9月 | Reference conditions and procedures for testing industrial and process measurement transmitters - Part 4 : specific procedures for level transmitters - Conditions de référence et procédures pour l'essai des transmetteurs de mesure industrielle et de processus - Partie 4: Procédures spécifiques pour les transmetteurs de niveau | 工業和過程測量變送器試驗的參考條件和規程-第4部分:液位變送器的特殊規程 | 查看 |
NF ISO 5725-4 | 2020年9月 | Accuracy (trueness and precision) of measurement methods and results - Part 4 : basic methods for the determination of the trueness of a standard measurement method - Exactitude (justesse et fidélité) des résultats et méthodes de mesure - Partie 4: Méthodes de base pour la détermination de la justesse d'une méthode de mesure normalisée | 測量方法和結果的準確度(正確度和精密度)-第4部分:測定標準測量方法真實度的基本方法 | 查看 |
NF EN IEC 63185 | 2021年1月 | Measurement of the complex permittivity for low-loss dielectric substrates balanced-type circular disk resonator method - Méthode au résonateur à disque circulaire de type symétrique pour mesurer la permittivité complexe des substrats diélectriques à faible perte | 低損耗介質基片復介電常數的測量平衡式圓盤諧振器法 | 查看 |
(注:翻譯僅供參考,具體以原文為準)