DIN EN ISO 26782:2010-02

Anaesthetic and respiratory equipment - Spirometers intended for the measurement of time forced expired volumes in humans (ISO 26782:2009 + Cor. 1:2009); German version EN ISO 26782:2009 + AC:2009

麻醉和呼吸設備-用于測量人定時用力呼氣量的肺活量計（ISO 26782:2009 + Cor. 1:2009);德語版EN ISO 26782:2009 + AC:2009

DIN

2010-02

查看

DIN EN 61968-9:2014-10

Application integration at electric utilities - System interfaces for distribution management - Part 9: Interfaces for meter reading and control (IEC 61968-9:2013); English version EN 61968-9:2014

電業應用綜合-配電管理系統接口-第9部分:儀表讀數和控制界面（IEC 61968-9:2013）;英文版EN 61968-9:2014

DIN

2014-10

查看

DIN 8128-1:2011-05

Automatic catchweighing instruments - Part 1: Metrological and technical requirements - Tests (OIML R 51-1:2006 + Erratum 2010)

自動分檢衡器-第1部分:計量和技術要求-試驗(OIML R 51-1:2006 + Erratum 2010)

DIN

2011-05

查看

DIN EN IEC 61315:2020-07

Calibration of fibre-optic power meters (IEC 61315:2019); German version EN IEC 61315:2019

纖維光學功率計校準(IEC 61315:2019);德語版EN IEC 61315:2019

DIN

2020-07

查看

DIN EN 61746-1:2011-10

Calibration of optical time-domain reflectometers (OTDR) - Part 1: OTDR for single-mode fibres (IEC 61746-1:2009); German version EN 61746-1:2011

光時域反射計(OTDRs)的校準-第1部分:單模光纖用光時域反射計(IEC 61746-1:2009);德語版EN 61746-1:2011

DIN

2011-10

查看

DIN EN 61746-2:2011-09

Calibration of optical time-domain reflectometers (OTDR) - Part 2: OTDR for multimode fibres (IEC 61746-2:2010); German version EN 61746-2:2011

光學時域反射計(OTDR)的校準-第2部分:多模光纖用光學時域反射計(IEC 61746-2:2010);德語版EN 61746-2:2011

DIN

2011-09

查看

DIN EN 62129-2:2012-03

Calibration of wavelength/optical frequency measurement instruments - Part 2: Michelson interferometer single wavelength meters (IEC 62129-2:2011); German version EN 62129-2:2011

波長/光頻測量儀的校準-第2部分:邁克遜單波長干涉儀（IEC 62129-2:2011）;德語版EN 61746-2:2011

DIN

2012-03

查看

DIN EN 13757-1:2015-01

Communication systems for meters - Part 1: Data exchange; German version EN 13757-1:2014

儀表通信系統-第1部分:數據交換-德語版EN 13757-1:2014

DIN

2015-01

查看

DIN EN 13757-3:2018-06

Communication systems for meters - Part 3: Application protocols; German version EN 13757-3:2018

儀表通信系統-第3部分:應用協議-德語版EN 13757-3:2018

DIN

2018-06

查看

DIN EN 16836-1:2017-02

Communication systems for meters - Wireless mesh networking for meter data exchange - Part 1: Introduction and standardization framework; German version EN 16836-1:2016

儀表通信系統-儀表數據交換用無線網狀網絡-第1部分:介紹和標準化框架-德語版EN 16836-1:2016

DIN

2017-02

查看

DIN EN 810:1997-06

Dehumidifiers with electrically driven compressors - Rating tests, marking, operational requirements and technical data sheet; German version EN 810:1997

帶電動壓縮機的減濕器-考核試驗,標記和操作要求及技術數據表-德語版EN 810:1997

DIN

1997-06

查看

DIN 8130:2014-11

Discontinuous totalizing automatic weighing instruments (totalizing hopper weighers) - Part 1: Metrological and technical requirements - Tests (OIML R 107-1:2007)

不連續合計自動稱重儀器（料斗稱重）-第1部分:計量和技術要求-試驗(OIML R 107-1:2007)

DIN

2014-11

查看

DIN EN 60359:2002-09

Electrical and electronic measurement equipment - Expression of the performance (IEC 60359:2001); German version EN 60359:2002

電氣和電子測量設備-性能的表示(IEC 60359:2001);德語版EN 60359:2002

DIN

2002-09

查看

DIN EN 62056-6-1:2017-07

Electricity metering data exchange - The DLMS/COSEM suite - Part 6-1: Object Identification System (OBIS) (IEC 62056-6-1:2015); English version EN 62056-6-1:2016

電能計量數據交換-DLMS/COSEM套件第6-1部分:對象識別系統(OBIS) (IEC 62056-6-1:2015);英文版EN 62056-6-1:2016

DIN

2017-07

查看

DIN EN 62056-6-2:2017-06

Electricity metering data exchange - The DLMS/COSEM suite - Part 6-2: COSEM interface classes (IEC 62056-6-2:2016); English version EN 62056-6-2:2016

電能計量數據交換-DLMS/COSEM套件-第6-2部分:COSEM接口類(IEC 62056-6-2:2016);英文版EN 62056-6-2:2016

DIN

2017-06

查看

DIN EN 62585:2013-03

Electroacoustics - Methods to determine corrections to obtain the free-field response of a sound level meter (IEC 62585:2012); German version EN 62585:2012

電聲學-確定獲得聲級儀自由場響應的修正的方法(IEC 62585:2012);德語版EN 62585:2012

DIN

2013-03

查看

DIN EN 61672-1:2014-07

Electroacoustics - Sound level meters - Part 1: Specifications (IEC 61672-1:2013); German version EN 61672-1:2013

電聲學-聲級計-第1部分:規范(IEC 61672-1:2013);德語版EN 61672-1:2013

DIN

2014-07

查看

DIN EN 61672-2:2018-01

Electroacoustics - Sound level meters - Part 2: Pattern evaluation tests (IEC 61672-2:2013 + AMD1:2017); German version EN 61672-2:2013 + A1:2017

電聲學-聲級計-第2部分:模式評估試驗(IEC 61672-2:2013 + AMD1:2017);德語版EN 61672-2:2013 + A1:2017

DIN

2018-01

查看

DIN EN 61672-3:2017-05

Electroacoustics - Sound level meters - Part 3: Periodic tests (IEC 61672-3:2013); German version EN 61672-3:2013

電聲學-聲級計-第3部分:周期性試驗(IEC 61672-3:2013);德語版EN 61672-3:2013

DIN

2017-05

查看

DIN EN 16796-3:2017-01

Energy efficiency of Industrial trucks - Test methods - Part 3: Container handling lift trucks; German version EN 16796-3:2016

工業卡車的能源效率-試驗方法-第3部分:集裝箱裝卸電梯-德語版EN 16796-3:2016

DIN

2017-01

查看

DIN EN ISO 15002:2020-05

Flow-metering devices for connection to terminal units of medical gas pipeline systems (ISO 15002:2008 + Amd.1:2018); German version EN ISO 15002:2008 + A1:2019

連接到醫用氣體管道系統終端單元的流量計量裝置(ISO 15002:2008 + Amd.1:2018);德語版EN ISO 15002:2008 + A1:2019

DIN

2020-05

查看

DIN 1319-1:1995-01

Fundamentals of metrology - Part 1: Basic terminology

計量學基礎-第1部分:基本術語

DIN

1995-01

查看

DIN 1319-2:2005-10

Fundamentals of metrology - Part 2: Terminology related to measuring equipment

計量學基礎-第2部分:與測量設備相關的術語

DIN

2005-10

查看

DIN 1319-3:1996-05

Fundamentals of metrology - Part 3: Evaluation of measurements of a single measurand, measurement uncertainty

計量學基礎-第3部分:單一測量值測量和測量誤差評價

DIN

1996-05

查看

DIN 1319-4:1999-02

Fundamentals of metrology - Part 4: Evaluation of measurements; uncertainty of measurement

計量學基礎-第4部分:測量評估; 測量的不定度

DIN

1999-02

查看

DIN 51898-1:2014-05

Gas analysis - Absolute volumetric method for dynamic preparation of calibration gases - Part 1: Preparation from pure gases, with CD-ROM

氣體分析-校準氣體動態制備的絕對體積法-第1部分:用純氣體制備光盤

DIN

2014-05

查看

DIN EN ISO 6143:2006-11

Gas analysis - Comparison methods for determining and checking the composition of calibration gas mixtures (ISO 6143:2001); German version EN ISO 6143:2006

氣體分析-測定并檢查標定用混合氣體成分的比較方法法(ISO 6143:2001);德語版EN ISO 6143:2006

DIN

2006-11

查看

DIN EN ISO 14912:2006-11

Gas analysis - Conversion of gas mixture composition data (ISO 14912:2003); German version EN ISO 14912:2006

氣體分析-氣體混合成份數據的轉換(ISO 14912:2003);德語版EN ISO 14912:2006

DIN

2006-11

查看

DIN EN ISO 16664:2017-09

Gas analysis - Handling of calibration gases and gas mixtures - Guidelines (ISO 16664:2017); German version EN ISO 16664:2017

氣體分析-校正氣體和氣體混合物的處理-指南(ISO 16664:2017)-德語版EN ISO 16664:2017

DIN

2017-09

查看

DIN EN ISO 15796:2008-11

Gas analysis - Investigation and treatment of analytical bias (ISO 15796:2005); German version EN ISO 15796:2008

氣體分析-分析偏差的調查和處理(ISO 15796:2005);德語版EN ISO 15796:2008

DIN

2008-11

查看

DIN 51897:2018-04

Gas analysis - Terms and definitions

氣體分析-術語和定義

DIN

2018-04

查看

DIN EN 16314:2013-09

Gas meters - Additional functionalities; German version EN 16314:2013

氣量計-附加功能;德語版EN 16314:2013

DIN

2013-09

查看

DIN EN 12405-1:2018-12

Gas meters - Conversion devices - Part 1: Volume conversion; German version EN 12405-1:2018

氣量計-換算裝置-第1部分:體積換算-德語版EN 12405-1:2018

DIN

2018-12

查看

DIN EN 12405-2:2012-10

Gas meters - Conversion devices - Part 2: Energy conversion; German version EN 12405-2:2012

氣量計-換算裝置-第2部分:能量轉換-德語版EN 12405-2:2012

DIN

2012-10

查看

DIN EN 12405-3:2016-04

Gas meters - Conversion devices - Part 3: Flow computer; German version EN 12405-3:2015

氣量計-換算裝置-第3部分:流量計算儀-德語版EN 12405-3:2015

DIN

2016-04

查看

DIN EN 1359:2017-11

Gas meters - Diaphragm gas meters; German version EN 1359:2017

氣量計-隔膜式燃氣表;德語版EN 1359:2017

DIN

2017-11

查看

DIN EN 12480:2018-05

Gas meters - Rotary displacement gas meters; German version EN 12480:2018

氣量計-旋轉排氣表;德語版EN 12480:2018

DIN

2018-05

查看

DIN EN 419:2020-04

Gas-fired overhead luminous radiant heaters for non-domestic use - Safety and energy efficiency; German version EN 419:2019

非家用燃氣照明架空發光輻射加熱器-安全和能源效率; 德語版EN 419:2019

DIN

2020-04

查看

DIN EN 17175:2020-04

Gas-fired overhead radiant strip heaters and multi-burner continuous radiant tube heater systems for non-domestic use - Safety and energy efficiency; German version EN 17175:2019

非家用燃氣架空輻射帶加熱器和多燃燒器連續輻射管加熱器系統-安全和能源效率; 德語版EN 17175:2019

DIN

2020-04

查看

DIN EN 416:2020-04

Gas-fired overhead radiant tube heaters and radiant tube heater systems for non-domestic use - Safety and energy efficiency; German version EN 416:2019

非家用燃氣架空輻射管加熱器和輻射管加熱器系統-安全和能源效率; 德語版EN 416:2019

DIN

2020-04

查看

DIN 32877-1:2020-04

Geometrical product specification (GPS) - Dimensional measuring equipment: Optoelectronic measurement of length - Part 1: Basic principles and terms

幾何產品規范(GPS)-尺寸測量設備:長度的光電測量-第1部分:基本原理和術語

DIN

2020-04

查看

DIN EN ISO 25178-70:2014-06

Geometrical product specification (GPS) - Surface texture: Areal - Part 70: Material measures (ISO 25178-70:2014); German version EN ISO 25178-70:2014

幾何產品規格(GPS)-表面結構:平面式-第70部分: 材料測量(ISO 25178-70:2014);德語版EN ISO 25178-70:2014

DIN

2014-06

查看

DIN 2280:2001-12

Geometrical Product Specifications (GPS) - "GO" and "NOT GO" screw plug gauges for ISO general purpose metric screw threads from 1 mm up to 40 mm nominal diameter

幾何產品規范(GPS)-螺紋公稱直徑1mm至40mm的ISO通用公制螺紋的過端和不過端螺紋塞規

DIN

2001-12

查看

DIN 2282-2:2001-12

Geometrical Product Specifications (GPS) - "GO" screw gauging members - Part 2: "GO" workshop gauges, check and setting gauging members for ISO general purpose metric screw threads over 40 mm up to 200 mm nominal diameter

幾何產品規格(GPS)-“GO”螺釘測量部件-第2部分:“GO”車間的儀表、檢查和設置測量部件

DIN

2001-12

查看

DIN 2285-1:2008-07

Geometrical product specifications (GPS) - "GO" screw ring gauges for ISO metric screw threads - Part 1: Nominal diameter from 1 mm up to 200 mm, general purpose

幾何產品規格(GPS)-ISO度制螺紋用“GO”螺環表-第1部分:1mm至200mm的公稱直徑

DIN

2008-07

查看

DIN 2284-2:2001-12

Geometrical Product Specifications (GPS) - "NOT GO" screw gauging members - Part 2: "NOT GO" workshop gauges, check and setting plug gauges for ISO general purpose metric screw threads over 40 mm up to 200 mm nominal diameter

幾何產品規格(GPS)-“NOTGO”螺釘測量構件-第2部分:“NOTGO”車間儀表,用于ISO通用公制螺紋的檢查和設置塞頭計

DIN

2001-12

查看

DIN EN ISO 463:2006-06

Geometrical Product Specifications (GPS) - Dimensional measuring equipment - Design and metrological characteristics of mechanical dial gauges (ISO 463:2006); German version EN ISO 463:2006

幾何產品規格(GPS)-尺寸測量設備-機械千分表的設計和計量學特性(ISO 463:2006);德語版EN ISO 463:2006

DIN

2006-06

查看

DIN EN ISO 463 Berichtigung 1:2009-07

Geometrical Product Specifications (GPS) - Dimensional measuring equipment - Design and metrological characteristics of mechanical dial gauges (ISO 463:2006); German version EN ISO 463:2006, Corrigendum to DIN EN ISO 463:2006-06; German version EN ISO 463:2006/AC:2009

幾何產品規格(GPS)-尺寸測量設備-機械千分表的設計和計量學特性(ISO 463:2006);德國版EN ISO 463:2006,對DIN EN ISO 463:2006-06的勘誤;德語版EN ISO 463:2006/AC:2009

DIN

2009-07

查看

DIN EN ISO 9493:2011-03

Geometrical product specifications (GPS) - Dimensional measuring equipment: Dial test indicators (lever type) - Design and metrological characteristics (ISO 9493:2010); German version EN ISO 9493:2010

產品幾何技術規范(GPS)-尺寸測量設備:刻度盤測試指示器(杠桿式)-設計與計量特性(ISO 9493:2010);德語版EN ISO 9493:2010

DIN

2011-03

查看

DIN EN ISO 13102:2012-12

Geometrical product specifications (GPS) - Dimensional measuring equipment: Electronic digital-indicator gauge - Design and metrological characteristics (ISO 13102:2012); German version EN ISO 13102:2012

產品幾何技術規范(GPS)-尺寸測量設備:三維測量設備:計量學特征和設計(ISO 13102:2012);德語版EN ISO 13102:2012

DIN

2012-12

查看

DIN EN ISO 3611:2011-03

Geometrical product specifications (GPS) - Dimensional measuring equipment: Micrometers for external measurements - Design and metrological characteristics (ISO 3611:2010); German version EN ISO 3611:2010

產品幾何技術規范(GPS)-尺寸測量設備:外觀測量用千分尺-計量學特征和設計(ISO 3611:2010);德語版EN ISO 3611:2010

DIN

2011-03

查看

DIN EN ISO 13225:2012-08

Geometrical product specifications (GPS) - Dimensional measuring equipment; Height gauges - Design and metrological characteristics (ISO 13225:2012); German version EN ISO 13225:2012

產品幾何技術規范(GPS)-尺寸測量設備:高度計-設計和計量特性(ISO 13225:2012);德語版EN ISO 13225:2012

DIN

2012-08

查看

DIN 2239:2006-12

Geometrical product specifications (GPS) - Gauge in dimensional metrology - Requirements and testing

產品幾何量技術規范(GPS)-尺寸計量量規-要求和檢驗

DIN

2006-12

查看

DIN 2250-1:2008-10

Geometrical product specifications (GPS) - GO ring gauges and setting ring gauges - Part 1: From 1 mm up to 315 mm nominal diameter

產品幾何量技術規范(GPS)-過端環規和定位環規-第1部分:1mm～315mm標稱直徑

DIN

2008-10

查看

DIN EN ISO 25178-2:2012-09

Geometrical product specifications (GPS) - Surface texture: Areal - Part 2: Terms, definitions and surface texture parameters (ISO 25178-2:2012); German version EN ISO 25178-2:2012

產品幾何技術規范(GPS)-表面結構:Areal-第2部分:術語、定義和表面紋理參數(ISO 25178-2:2012);德語版EN ISO 25178-2:2012

DIN

2012-09

查看

DIN EN ISO 12085:1998-05

Geometrical Product Specifications (GPS) - Surface texture: Profile method - Motif parameters (ISO 12085:1996); German version EN ISO 12085:1997

產品幾何技術規范(GPS)-表面結構:輪廓法-圖形參數(ISO 12085:1996);德語版EN ISO 12085:1997

DIN

1998-05

查看

DIN EN ISO 4287:2010-07

Geometrical Product Specifications (GPS) - Surface texture: Profile method - Terms, definitions and surface texture parameters (ISO 4287:1997 + Cor 1:1998 + Cor 2:2005 + Amd 1:2009); German version EN ISO 4287:1998 + AC:2008 + A1:2009

產品幾何量技術規范(GPS)-表面結構:輪廓法-表面結構的術語、定義及參數(ISO 4287:1997 + Cor 1:1998 + Cor 2:2005 + Amd 1:2009);德國版本EN ISO 4287:1998 + AC:2008 + A1:2009

DIN

2010-07

查看

DIN EN ISO 5436-1:2000-11

Geometrical Product Specifications (GPS) - Surface texture: Profile method; Measurement standards - Part 1: Material measures (ISO 5436-1:2000); German version EN ISO 5436-1:2000

產品幾何量技術規范(GPS)-表面結構:輪廓法;測量標準-第1部分:材料測量(ISO 5436-1:2000);德語版EN ISO 5436-1:2000

DIN

2000-11

查看

DIN EN ISO 13385-1:2020-03

Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Design and metrological characteristics of callipers (ISO 13385-1:2019); German version EN ISO 13385-1:2019

產品幾何量技術規范(GPS)-尺寸測量設備-第1部分:卡鉗的設計和計量特性(ISO 13385-1:2019);德語版EN ISO 13385-1:2019

DIN

2020-03

查看

DIN EN ISO 1938-1:2016-03

Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Plain limit gauges of linear size (ISO 1938-1:2015); German version EN ISO 1938-1:2015

產品幾何量技術規范(GPS)-尺寸測量設備-第1部分: 線性尺寸的普通極限量規(ISO 1938-1:2015);德語版EN ISO 1938-1:2015

DIN

2016-03

查看

DIN EN ISO 13385-2:2020-09

Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2: Design and metrological characteristics of calliper depth gauges (ISO 13385-2:2020); German and English version EN ISO 13385-2:2020

產品幾何量技術規范(GPS)-尺寸測量設備-第2部分:卡尺深度表的設計和計量特性（ISO13385-2:2020）;德語和英文版EN ISO 13385-2:2020

DIN

2020-09

查看

DIN EN ISO 1938-2:2017-05

Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2: Reference disk gauges (ISO 1938-2:2017); German version EN ISO 1938-2:2017

產品幾何技術規范(GPS)-尺寸測量設備. 第2部分: 基準度盤式量規(ISO 1938-2:2017); 德語版EN ISO 1938-2:2017

DIN

2017-05

查看

DIN 863-1:2017-02

Geometrical product specifications (GPS) - Micrometers - Part 1: Micrometers for external measurements; maximum permissible errors

產品幾何量技術規范(GPS)-微分米-第1部分:外部測量用微分米-最大允許誤差

DIN

2017-02

查看

DIN EN ISO 25178-73:2019-10

Geometrical product specifications (GPS) - Surface texture: Areal - Part 73: Terms and definitions for surface defects on material measures (ISO 25178-73:2019); German version EN ISO 25178-73:2019

產品幾何量技術規范(GPS)-表面紋理:Areal-第73部分:材料測量中表面缺陷的術語和定義（ISO25178-73:2019）;德語版EN ISO 25178-73:2019

DIN

2019-10

查看

DIN EN ISO 8041-1:2017-10

Human response to vibration - Measuring instrumentation - Part 1: General purpose vibration meters (ISO 8041-1:2017); German version EN ISO 8041-1:2017

人對振動的反應-測量儀-第1部分:通用測振儀(ISO 8041-1:2017);德語版EN ISO 8041-1:2017

DIN

2017-10

查看

DIN 16195:1991-09

Industrial liquid-in-glass thermometers with round or V-shaped cade; requirements and testing

帶圓形或V形底座的工業玻璃內液體溫度計-要求和試驗

DIN

1991-09

查看

DIN 5480-15:2006-03

Involute splines based on reference diameters - Part 15: Inspection

基于參考直徑的漸開線花鍵-第15部分:檢查

DIN

2006-03

查看

DIN EN 14268:2005-11

Irrigation techniques - Meters for irrigation water; German version EN 14268:2005

灌溉技術-灌溉用水表-德語版EN 14268:2005

DIN

2005-11

查看

DIN EN 60027-6:2008-04

Letter symbols to be used in electrical technology - Part 6: Control technology (IEC 60027-6:2006); German version EN 60027-6:2007

電氣技術用字母符號-第6部分:控制技術(IEC 60027-6:2006);德語版EN 60027-6:2007

DIN

2008-04

查看

DIN EN ISO 3993:1995-11

Liquefied petroleum gas and light hydrocarbons - Determination of density or relative density - Pressure hydrometer method (ISO 3993:1984); German version EN ISO 3993:1995

液化石油氣和輕質烴類-密度或相對密度的測定-壓力液體比重測定法(ISO 3993:1984);德語版EN ISO 3993:1995

DIN

1995-11

查看

DIN EN IEC 61293:2021-03

Marking of electrical equipment with ratings related to electrical supply - Safety requirements (IEC 61293:2019); German version EN IEC 61293:2020

與電源相關的額定值的電氣設備的標記-安全要求(IEC 61293:2019);德語版EN IEC 61293:2020

DIN

2021-03

查看

DIN 1305:1988-01

Mass, as weighed value, force, weight force, weight, load; concepts

質量,如重量值、力、重量、重量、載荷;概念

DIN

1988-01

查看

DIN EN ISO 20456:2020-09

Measurement of fluid flow in closed conduits - Guidance for the use of electromagnetic flowmeters for conductive liquids (ISO 20456:2017); German version EN ISO 20456:2019

封閉管道中流體流量的測量-導電液體用電磁流量計的使用指南(ISO 20456:2017);德語版EN ISO 20456:2019

DIN

2020-09

查看

DIN EN 24185:1993-08

Measurement of liqid flow in closed conduits; weighing method (ISO 4185:1980); German version EN 24185:1993

封閉管道中液體流量的測量;稱重法(ISO 4185:1980);德語版EN 24185:1993

DIN

1993-08

查看

DIN 16002:2017-07

Mechanical pressure and temperature gauges - Absolute pressure gauges - Dimensions, Metrology, Requirements and Testing

機械壓力表和溫度表-絕對壓力計-尺寸, 計量, 要求和試驗

DIN

2017-07

查看

DIN 16003:2018-04

Mechanical pressure and temperature gauges - Differential pressure gauges - Dimensions, metrology, requirements and testing

機械壓力表和溫度表-差壓表-尺寸, 計量, 要求和試驗

DIN

2018-04

查看

DIN 16001:2017-04

Mechanical pressure and temperature gauges - High pressure gauges - Dimensions, Metrology, Requirements and Testing

機械壓力表和溫度表-高壓壓力計-尺寸, 計量, 要求和試驗

DIN

2017-04

查看

DIN EN 60580:2001-12

Medical electrical equipment - Dose area product meters (IEC 60580:2000); German version EN 60580:2000

醫用電氣設備-劑量面積產品表(IEC 60580:2000);德語版EN 60580:2000

DIN

2001-12

查看

DIN EN 61674:2015-11

Medical electrical equipment - Dosimeters with ionization chambers and/or semiconductor detectors as used in X-ray diagnostic imaging (IEC 61674:2012); German version EN 61674:2013

醫用電氣設備-用于X射線診斷成像中帶電離室和/或半導體探測器的劑量儀(IEC 61674:2012);德語版EN 61674:2013

DIN

2015-11

查看

DIN EN 60731:2014-10

Medical electrical equipment - Dosimeters with ionization chambers as used in radiotherapy (IEC 60731:2011); German version EN 60731:2012

醫療電氣設備-帶電離室的放射量測定器(IEC 60731:2011);德語版EN 60731:2012

DIN

2014-10

查看

DIN EN 62467-1:2016-09

Medical electrical equipment - Dosimetric instruments as used in brachytherapy - Part 1: Instruments based on well-type ionization chambers (IEC 62467-1:2009); German version EN 62467-1:2015

醫用電氣設備-近距離治療用的劑量測量儀器-第1部分:基于良好型電離室的儀器(IEC 62467-1:2009);德語版EN 62467-1:2015

DIN

2016-09

查看

DIN EN 61676:2010-05

Medical electrical equipment - Dosimetric instruments used for non-invasive measurement of X-ray tube voltage in diagnostic radiology (IEC 61676:2002+A1:2008); German version EN 61676:2002+A1:2009

醫用電氣設備-診斷放射學中X射線管電壓的非侵入性測量用劑量測定儀器(IEC 61676:2002+A1:2008);德語版EN 61676:2002+A1:2009

DIN

2010-05

查看

DIN EN ISO 80601-2-56:2020-08

Medical electrical equipment - Part 2-56: Particular requirements for basic safety and essential performance of clinical thermometers for body temperature measurement (ISO 80601-2-56:2017 + Amd1:2018); German version EN ISO 80601-2-56:2017 + A1:2020

醫療電氣設備-第2-56部分:測量體溫用臨床溫度計的基本安全和基本性能的詳細要求(ISO 80601-2-56:2017 + Amd1:2018);德語版EN ISO 80601-2-56:2017 + A1:2020

DIN

2020-08

查看

DIN EN ISO 80601-2-61:2019-09

Medical electrical equipment - Part 2-61: Particular requirements for basic safety and essential performance of pulse oximeter equipment (ISO 80601-2-61:2017, Corrected version 2018-02); German version EN ISO 80601-2-61:2019

醫用電氣設備-第2-61部分:脈沖血氧計設備基本安全和基本性能的特殊要求(ISO 80601-2-61:2017,修正版2018-02);德語版EN ISO 80601-2-61:2019

DIN

2019-09

查看

DIN EN 45501:2016-03

Metrological aspects of non-automatic weighing instruments; German version EN 45501:2015

非自動稱重儀器的計量 德語版EN45501:2015

DIN

2016-03

查看

DIN EN ISO 15112:2014-09

Natural gas - Energy determination (ISO 15112: 2011); German version EN ISO 15112:2014

天然氣-能量測定（ISO15112:2011）;德語版EN 45501:2015

DIN

2014-09

查看

DIN EN ISO 2360:2017-12

Non-conductive coatings on non-magnetic electrically conductive base metals - Measurement of coating thickness - Amplitude-sensitive eddy-current method (ISO 2360:2017); German version EN ISO 2360:2017

非磁性導電基體上非導體覆蓋層-鍍層厚度的測量-振幅靈敏性渦流法(ISO 2360:2017);德語版EN ISO 2360:2017

DIN

2017-12

查看

DIN EN ISO 81060-1:2012-08

Non-invasive sphygmomanometers - Part 1: Requirements and test methods for non-automated measurement type (ISO 81060-1:2007); German version EN ISO 81060-1:2012

非侵入式血壓計-第1部分:非自動測量型試驗方法和要求(ISO 81060-1:2007);德語版EN ISO 81060-1:2012

DIN

2012-08

查看

DIN 5031-11:2011-04

Optical radiation physics and illuminating engineering - Part 11: Radiometer for measuring actinic radiant quantities - Terms, characteristics and their classification

光輻射物理學和照明工程-第11部分:測量放線輻射量的輻射計-術語、特性及其分類

DIN

2011-04

查看

DIN ISO 17123-4:2017-09

Optics and optical instruments - Field procedures for testing geodetic and surveying instruments - Part 4: Electro-optical distance meters (EDM measurements to reflectors) (ISO 17123-4:2012)

光學和光學儀器-大地測量和地質勘測儀器的現場試驗程序-第4部分:光電測距儀（對反射器的EDM測量）(ISO 17123-4:2012)

DIN

2017-09

查看

DIN EN ISO 8598-1:2015-01

Optics and optical instruments - Focimeters - Part 1: General purpose instruments (ISO 8598-1:2014); German version EN ISO 8598-1:2014

光學和光學儀器-泡沫計-第1部分:通用儀器(ISO 8598-1:2014);德語版EN ISO 8598-1:2014

DIN

2015-01

查看

DIN ISO 16331-1:2020-09

Optics and optical instruments - Laboratory procedures for testing surveying and construction instruments - Part 1: Performance of handheld laser distance meters (ISO 16331-1:2017)

光學和光學儀器-測量和施工儀器試驗的實驗室程序第1部分:手持式激光距離表的性能(ISO 16331-1:2017)

DIN

2020-09

查看

DIN EN ISO 11554:2017-12

Optics and photonics - Lasers and laser-related equipment - Test methods for laser beam power, energy and temporal characteristics (ISO 11554:2017); German version EN ISO 11554:2017

光學和光子學-激光和激光相關設備-激光束功率、能量和時間特性的試驗方法(ISO 11554:2017);德語版EN ISO 11554:2017

DIN

2017-12

查看

DIN EN ISO 15212-1 Berichtigung 1:2009-07

Oscillation-type density meters - Part 1: Laboratory instruments (ISO 15212-1:1998); German version EN ISO 15212-1:1999, Corrigendum to DIN EN ISO 15212-1:1999-06; German version EN ISO 15212-1:1999/AC:2009

振蕩型密度計-第1部分:實驗室儀器(ISO 15212-1:1998); 德語版EN ISO 15212-1:1999,DIN EN ISO 15212-1:1999-06的勘誤;德國版EN ISO 15212-1:1999/AC:2009

DIN

2009-07

查看

DIN EN ISO 8222:2020-10

Petroleum measurement systems - Calibration - Volumetric measures, proving tanks and field measures (including formulae for properties of liquids and materials) (ISO 8222:2020); German version EN ISO 8222:2020

石油測量系統-校準-體積測量、試驗罐和現場測量（包括液體和材料性能的計算公式）(ISO 8222:2020);德語版EN ISO 8222:2020

DIN

2020-10

查看

DIN 5032-10:2020-07

Photometry - Part 10: Luminance meters, concepts, characteristics and their designation

光度法-第10部分:亮度計、概念、特性及其名稱

DIN

2020-07

查看

DIN 5032-11:2020-07

Photometry - Part 11: Near-field goniophotometers, terms, characteristics and their designation

光度法-第11部分:近場測光計、術語、特性及其名稱

DIN

2020-07

查看

DIN EN ISO 18830:2018-02

Plastics - Determination of aerobic biodegradation of non-floating plastic materials in a seawater/sandy sediment interface - Method by measuring the oxygen demand in closed respirometer (ISO 18830:2016); German version EN ISO 18830:2017

塑料-海水/砂質沉積物界面中非浮塑料材料的需氧生物降解的測定-密閉呼吸計需氧量的方法(ISO 18830:2016);德語版EN ISO 18830:2017

DIN

2018-02

查看

DIN EN 16465:2015-12

Plastics - Methods for the calibration of black-standard and white-standard thermometers and black-panel and white-panel thermometers for use in natural and artificial weathering; German version EN 16465:2015

塑料-用于自然風化和人工風化的黑色標準溫度計和白色標準溫度計以及黑色板溫度計和白色板溫度計的校準方法EN 16465:2015

DIN

2015-12

查看

DIN ISO 11040-7:2020-11

Prefilled syringes - Part 7: Packaging systems for sterilized subassembled syringes ready for filling (ISO 11040-7:2015)

預填充注射器-第7部分:準備消毒的分裝注射器的包裝系統(ISO 11040-7:2015)

DIN

2020-11

查看

DIN EN 837-1:1997-02

Pressure gauges - Part 1: Bourdon tube pressure gauges; dimensions, metrology, requirements and testing; German version EN 837-1:1996

測壓儀-第1部分:波登測壓儀.尺寸、測量技術、要求和試驗-德語版EN 837-1:1996

DIN

1997-02

查看

DIN EN 837-3:2019-08

Pressure gauges - Part 3: Diaphragm and capsule pressure gauges; dimensions, metrology, requirements and testing; German version EN 837-3:1996

測壓儀-第3部分:隔膜式和膠囊式壓力表-尺寸、計量學、要求和試驗-德語版EN 837-3:1996

DIN

2019-08

查看

DIN EN ISO 10524-1:2019-08

Pressure regulators for use with medical gases - Part 1: Pressure regulators and pressure regulators with flow-metering devices (ISO 10524-1:2018); German version EN ISO 10524-1:2019

醫用氣體用壓力調節器-第1部分:帶流量計量裝置的壓力調節器和壓力調節器(ISO 10524-1:2018);德語版EN ISO 10524-1:2019

DIN

2019-08

查看

DIN EN ISO 15378:2018-04

Primary packaging materials for medicinal products - Particular requirements for the application of ISO 9001:2015, with reference to good manufacturing practice (GMP) (ISO 15378:2017); German version EN ISO 15378:2017

醫藥用初級包裝材料-ISO 9001:2015中應用的特殊要求,參照良好的制造規范(GMP) (ISO 15378:2017);德語版ENISO15378:2017

DIN

2018-04

查看

DIN 32567-1:2015-06

Production equipment for microsystems - Determination of the influence of materials on the optical and tactile dimensional metrology - Part 1: Qualitative estimation of the material and procedure specific influences

微系統生產設備-材料對光學和觸覺尺寸計量的影響的測定-第1部分:材料和程序特定影響的定性估計

DIN

2015-06

查看

DIN 32567-2:2014-10

Production equipment for microsystems - Determination of the influence of materials on the optical and tactile dimensional metrology - Part 2: Specimen for tactile procedures

微系統用生產設備-材料對光學和觸覺尺寸計量學影響的測定-第2部分:觸覺程序用試樣

DIN

2014-10

查看

DIN 32567-3:2014-10

Production equipment for microsystems - Determination of the influence of materials on the optical and tactile dimensional metrology - Part 3: Derivation of correction values for tactile measuring devices

微系統用生產設備-材料對光學和觸覺尺寸計量學影響的測定-第3部分:觸覺測量裝置修正值的推導

DIN

2014-10

查看

DIN 32567-4:2015-06

Production equipment for microsystems - Determination of the influence of materials on the optical and tactile dimensional metrology - Part 4: Specimen for optical procedures

微系統用生產設備-材料對光學和觸覺尺寸計量學影響的測定-第4部分:光學程序用試樣

DIN

2015-06

查看

DIN 32567-5:2015-06

Production equipment for microsystems - Determination of the influence of materials on the optical and tactile dimensional metrology - Part 5: Derivation of correction values for optical measuring devices

微系統用生產設備-材料對光學和觸覺尺寸計量學的影響的測定-第5部分:光學測量裝置的校正值的推導

DIN

2015-06

查看

DIN EN ISO 14414:2019-09

Pump system energy assessment (ISO/ASME 14414:2019); German version EN ISO 14414:2019

泵系統能源評估(ISO/ASME 14414:2019);德語版EN ISO 14414:2019

DIN

2019-09

查看

DIN EN 16480:2017-07

Pumps - Minimum required efficiency of rotodynamic water pumps; German version EN 16480:2016

泵-旋轉動力水泵的最低要求效率;德國版EN 16480:2016

DIN

2017-07

查看

DIN EN 16644:2015-04

Pumps - Rotodynamic pumps - Glandless circulators having a rated power input not exceeding 200 W for heating installations and domestic hot water installations - Noise test code (vibro-acoustics) for measuring structure- and fluid-borne noise; German version EN 16644:2014

泵-旋轉動力泵-額定功率不超過加熱裝置和200W的家用熱水裝置的200W的無循環器-用于測量結構和流體載噪聲的噪聲測試代碼（振動聲學）;德語版EN 16644:2014

DIN

2015-04

查看

DIN EN ISO 9906:2013-03

Rotodynamic pumps - Hydraulic performance acceptance tests - Grades 1, 2 and 3 (ISO 9906:2012); German version EN ISO 9906:2012

回轉動力泵-液壓性能驗收試驗.等級1、2和3(ISO 9906:2012);德語版EN ISO 9906:2012

DIN

2013-03

查看

DIN EN ISO 80369-1:2019-08

Small-bore connectors for liquids and gases in healthcare applications - Part 1: General requirements (ISO 80369-1:2018); German version EN ISO 80369-1:2018

醫療保健用液體和氣體用小口徑連接器-第1部分:一般要求(ISO 80369-1:2018);德語版EN ISO 80369-1:2018

DIN

2019-08

查看

DIN 55540-1:1978-05

Testing of packaging; determining the filling ratio of standard capacity prepacks; prepacks whose contents are indicated by weight

包裝檢驗:標準容量預包裝填充率的測定;預包裝物品按重量標注

DIN

1978-05

查看

DIN EN 1434-6:2019-08

Thermal energy meters - Part 6: Installation, commissioning, operational monitoring and maintenance; German version EN 1434-6:2015+A1:2019

熱量表-第6部分:安裝、調試、運行監測和維護-德語版EN 1434-6:2015+A1:2019

DIN

2019-08

查看

DIN EN 12645:2015-02

Tyre pressure measuring instruments - Devices for inspection of pressure and/or inflation / deflation of tyres for motor vehicles - Metrology, requirements and testing; German version EN 12645:2014

輪胎壓力測量儀器-汽車輪胎壓力和/或充氣充氣的檢查裝置-計量、要求和試驗-德語版EN 12645:2014

DIN

2015-02

查看

DIN EN 14236:2018-12

Ultrasonic domestic gas meters; German version EN 14236:2018

超聲波家用氣體計量表;德語版EN 14236:2018

DIN

2018-12

查看

DIN 2282-1:2000-01

Verification of geometrical parameters - "GO" screw gauging members - Part 1: "GO" workshop gauges, reference and setting gauges for ISO general purpose metric screw threads from 1 mm up to 40 mm nominal diameter

幾何參數的驗證-螺紋過端量規-第1部分:標稱直徑1至40mm的ISO通用米制螺紋過端工作量規、檢驗量規和定位量規

DIN

2000-01

查看

DIN 2284-1:2000-01

Verification of geometrical parameters - "NOT GO" screw gauging members - Part 1: "NOT GO" workshop gauges, reference and setting gauges for ISO general purpose metric screw threads from 1 mm up to 40 mm nominal diameter

幾何參數的驗證-螺紋不過端量規-第1部分:公稱直徑1至40mm的ISO通用米制螺紋不過端工作量規、檢驗量規和定位量規

DIN

2000-01

查看

DIN 879-3:1999-06

Verification of geometrical parameters - Dial indicator for linear measurement - Part 3: With mechanical indication and electrical limit contacts

幾何參數的驗證-線性測量的表號指示器-第3部分:帶機械指示器和電氣極限觸點

DIN

1999-06

查看

DIN 879-1:1999-06

Verification of geometrical parameters - Dial indicator for linear mesurement - Part 1: With mechanical indication

幾何參數的驗證-線性測量的表號指示器-第1部分:帶機械指示器

DIN

1999-06

查看

DIN 863-2:1999-04

Verification of geometrical parameters - Micrometers - Part 2: Micrometer callipers heads, Depth micrometer; concepts, requirements, testing

幾何參數的驗證-微分米-第2部分:微分米卡鉗頭、深度微米-概念、要求、試驗

DIN

1999-04

查看

DIN 863-3:1999-04

Verification of geometrical parameters - Micrometers - Part 3: Special design micrometer callipers for external measurement; characteristics, requirements, testing

幾何參數的驗證-微米計-第3部分:外部測量專用設計微米卡鉗-特性、要求、試驗

DIN

1999-04

查看

DIN 51562-1:1999-01

Viscometry - Measurement of kinematic viscosity by means of the Ubbelohde viscometer - Part 1: Viscometer specification and measurement procedure

粘度測定法-使用旋轉粘度計測量粘度和流動曲線-第1部分:原理和測量幾何學

DIN

1999-01

查看

DIN 51562-4:1999-01

Viscometry - Measurement of kinematic viscosity by means of the Ubbelohde viscometer - Part 4: Viscometer calibration and determination of the uncertainty of measurement

粘度測定法-用英尺粘度計測量運動粘度-第4部分:粘度計校準和測量不確定度的測定

DIN

1999-01

查看

DIN 53019-3:2008-09

Viscometry - Measurement of viscosities and flow curves by means of rotational viscometers - Part 3: Errors of measurement and corrections

粘度測定法-用旋轉粘度計測量粘度和流量曲線-第3部分:測量和修正誤差

DIN

2008-09

查看

DIN 53019-2:2001-02

Viscosimetry - Measurement of viscosities and flow curves by means of rotation viscosimeters - Part 2: Viscosimeter calibration and determination of the uncertainty of measurement

粘度測定法-用旋轉粘度計測量粘度和流量曲線-第2部分:粘度計校準和測量不確定性測定

DIN

2001-02

查看

DIN EN ISO 4064-1:2017-10

Water meters for cold potable water and hot water - Part 1: Metrological and technical requirements (ISO 4064-1:2014); German version EN ISO 4064-1:2017

可飲用冷水和熱水表-第1部分:計量和技術要求(ISO 4064-1:2014);德語版EN ISO 4064-1:2017

DIN

2017-10

查看

DIN EN ISO 4064-2:2017-10

Water meters for cold potable water and hot water - Part 2: Test methods (ISO 4064-2:2014); German version EN ISO 4064-2:2017

可飲用冷水和熱水表-第2部分:試驗方法(ISO 4064-2:2014);德語版EN ISO 4064-2:2017

DIN

2017-10

查看

DIN EN ISO 4064-4:2014-11

Water meters for cold potable water and hot water - Part 4: Non-metrological requirements not covered in ISO 4064-1 (ISO 4064-4:2014); German version EN ISO 4064-4:2014

可飲用冷水和熱水表-第4部分:ISO 4064-1未述及非計量要求;德語版EN ISO 4064-4:2014

DIN

2014-11

查看

DIN EN ISO 4064-5:2017-10

Water meters for cold potable water and hot water - Part 5: Installation requirements (ISO 4064-5:2014); German version EN ISO 4064-5:2017

可飲用冷水和熱水表-安裝要求(ISO 4064-5:2014);德語版EN ISO 4064-5:2017

DIN

2017-10

查看

DIN 8127:2007-11

Weights of classes E?, E?, F?, F?, M?, M???, M?, M???, and M? - Metrological and technical requirements (OIML R 111-1:2004)

權重類E?,E?,F?,F?,M?,M???,M?,M???,and M?-計量與技術要求(OIML R 111-1:2004)

DIN

2007-11

查看

DIN EN 1434-1:2019-08

Thermal energy meters - Part 1: General requirements; German version EN 1434-1:2015+A1:2018

熱量表-第1部分:一般要求-德語版EN 1434-1:2015+A1:2018

DIN

2019-08

查看

DIN EN 1434-2:2019-08

Thermal energy meters - Part 2: Constructional requirements; German version EN 1434-2:2015+A1:2018

熱量表-第2部分:建筑要求-德語版EN 1434-2:2015+A1:2018

DIN

2019-08

查看

DIN EN 1434-3:2016-02

Heat meters - Part 3: Data exchange and interfaces; German version EN 1434-3:2015

熱量表-第3部分:數據交換和接口-德語版EN 1434-3:2015

DIN

2016-02

查看

DIN EN 1434-4:2019-08

Thermal energy meters - Part 4: Pattern approval tests; German version EN 1434-4:2015+A1:2018

熱量表-第4部分:型式批準試驗-德語版EN 1434-4:2015+A1:2018

DIN

2019-08

查看

DIN EN 1434-5:2019-08

Thermal energy meters - Part 5: Initial verification tests; German version EN 1434-5:2015+A1:2019

熱量表-第5部分:初始驗證試驗-德語版EN 1434-5:2015+A1:2019

DIN

2019-08

查看

DIN EN 1796:2013-05

Plastics piping systems for water supply with or without pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP); German version EN 1796:2013

有壓或無壓供水塑料管道系統-基于不飽和聚酯樹脂(UP)的玻璃增強熱固性塑料(GRP);德語版EN 1796:2013

DIN

2013-05

查看

DIN EN 12261:2020-09

Gas meters - Turbine gas meters; German version EN 12261:2018

燃氣表-渦輪機燃氣表;德語版EN 12261:2018

DIN

2020-09

查看

DIN EN 50470-3:2020-03

Electricity metering equipment (a.c.) - Part 3: Particular requirements - Static meters for active energy (class indexes A, B and C); German version EN 50470-3:2006 + A1:2018

電學計量設備(a.c.)-特殊要求-第3部分:有功電能(等級指數A,B和C)靜態計;德語版EN 50470-3:2006 + A1:2018

DIN

2020-03

查看

DIN EN 50470-2:2020-08

Electricity metering equipment (a.c.) - Part 2: Particular requirements - Electromechanical meters for active energy (class indexes A and B); German version EN 50470-2:2006 + A1:2018

電學計量設備(a.c.)-第2部分:特殊要求-有功電能(等級指數A,B)電極量表;德語版EN 50470-2:2006 + A1:2018

DIN

2020-08

查看

DIN EN 50470-1:2019-08

Electricity metering equipment (a.c.) - Part 1: General requirements, tests and test conditions - Metering equipment (class indexes A, B and C); German version EN 50470-1:2006 + A1:2018

電學計量設備(a.c.)-第1部分:一般要求,試驗和試驗條件-測量設備(等級指數A,B和C);德語版EN 50470-1:2006 + A1:2018

DIN

2019-08

查看

DIN EN 62052-11:2017-09

Electricity metering equipment (AC) - General requirements, tests and test conditions - Part 11: Metering equipment (IEC 62052-11:2003 + A1:2016); German version EN 62052-11:2003 + A1:2017

交流電測量設備(AC)-通用要求、試驗和試驗條件-第11部分:測量設備(IEC 62052-11:2003 + A1:2016);德語版EN 62052-11:2003 + A1:2017

DIN

2017-09

查看